Title Page

  • Job Site-

undefined

  • undefined

  • Conducted on

  • Prepared by

undefined

Previous site inspection review.

  • Have unsafe items from previous site inspection been corrected?

Job Site Access

  • Is access to and from the job site adequate?

  • Is there adequate overhead protection at access ramps and walkways going into active job site?

Lighting

  • Is lighting adequate for the job site?

  • Are employees equipped/using task lighting when needed?

Housekeeping, Material Storage, rebar impalement, rebar debris.

  • Is housekeeping and material storage adequate and safe for the job site?

  • Are all rebar implement hazards protected?<br>

  • Is rebar debris, sections of tie wire and cut off pieces out of the work area and disposed of properly?

Electrical

  • Are electrical cords free from damage? (Missing ground pin, knicks, abrasions etc.)

Hand and Power Tools

  • Are all hand and power tools in good working order? (Guards, electrical components etc.)

PPE

  • Are all employees properly equipped with necessary PPE?

  • Are all employees wearing necessary PPE while on the job site?

  • Are all employees being supplied necessary PPE equipment to perform their task?

Fall Protection

  • Are employees properly equipped with fall Protection equipment?

  • Are employees exposed to a fall of 6' or more?

  • Are employees using fall Protection equipment properly?

  • Are all employees who are exposed to a fall of 6' or more properly tied off?

  • Are guardrails, mid rails & toe boards in place wherever necessary?

  • Are all open holes covered with hole covers, secured and labeled HOLE?

Cranes and Rigging

  • Is crane setup properly with outriggers in place?

  • Are all riggers/signalmen trained and certified?

  • Is rigging being properly inspected and documented weekly?

  • Are air horns being blown for all overhead picks with the crane?

  • Are tag lines on all loads being picked with the crane?

Cutting/Burning/Welding/Cylinder Storage

  • Are all necessary hot work permits in place and on site?

  • Are face shields being worn while saw cutting rebar/during grinding operations?

  • Are all cylinders being properly stored?

Silica Control

  • Are silica dust hazards being controlled/contained properly?

LPS/Core System

  • Are plywood flaps on LPS in place 100%

  • Has LPS been inspected for Safety on all floors? (Secured to shoes, fall hazard protection in place, edges swept clean etc)

  • Post Jump Inspection- Has the LPS been inspected after it was raised?

  • Has core system been inspected pre & post jump?

  • Are all holes/openings covered in core system to prevent debris/material from fall through?

Miscellaneous Safety Concerns

  • Are post shores along guardrail system/at leading edge secured to building structure to prevent from falling over edge?

  • Are "Laser in Use" signs posted whenever a laser is being used on site?<br>

Ladders

  • Are all ladders in good working condition?

  • Are ladders secured on top and bottom?

  • Is the proper ladder being used for the specific job?<br>

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.