SCISSOR LIFT JOBSITE PRE-DELIVERY AND FREQUENT INSPECTION REPORT

• Serial Number:

• Machine Model:

• Hourmeter Reading:

• Inspection Type:

  Pre-Delivery

  Frequent Inspection

• Previous Inspection Date:

  Date

• Control levers, switches, Gauges and instruments operate properly, including options (horns, lights, etc.).

  Yes

  No

  N/A

• Detents properly lock controls in place. Check condition of control enclosures and protective boots/guards.

  Yes

  No

  N/A

• Emergency stop switches at the ground & platform control stations operate properly, (Shuts off controls & engine).

  Yes

  No

  N/A

• Lift, drive & speed cut-outs operates properly.

  Yes

  No

  N/A

• Manual descent/auxiliary power system operates properly.

  Yes

  No

  N/A

• Function enable system if equipped, operates properly. (Disables functions within 3 seconds).

  Yes

  No

  N/A

• Brakes operate properly.

  Yes

  No

  N/A

• Machine functions operate properly at both ground & platform controls (lift, manual descent, etc..).

  Yes

  No

  N/A

Platform Assembly

• Platform installed & secure.

  Yes

  No

  N/A

• Platform extension deck & related components secure & undamaged.

  Yes

  No

  N/A

• Platform rails installed & secure, midrail chain/gate and bars installed & latched properly.

  Yes

  No

  N/A

Scissor Arms

• Scissor arms free of damage, cracks and distortion.

  Yes

  No

  N/A

• Arm safety props operational.

  Yes

  No

  N/A

• Cylinder pins, pivot pins & attaching hardware secure & undamaged.

  Yes

  No

  N/A

• Arm pins, wear pads & attaching hardware secure & undamaged.

  Yes

  No

  N/A

Chassis

• Wheel rim nuts torqued properly.

  Yes

  No

  N/A

• Check tires for proper inflation, damage & wear.

  Yes

  No

  N/A

• Steer, drive & axle components secure & undamaged.

  Yes

  No

  N/A

• Outriggers/stabilizers operate properly.

  Yes

  No

  N/A

• Hydraulic tray & battery/engine compartment covers open & latch properly.

  Yes

  No

  N/A

• Static strap is in place. (If applicable)

  Yes

  No

  N/A

Power System

• Engine idle, throttle & RPM set properly.

  Yes

  No

  N/A

• Fluid levels correct, hydraulic tank, engine oil, torque hubs, coolant & batteries.

  Yes

  No

  N/A

• Air & fuel filter clean.

  Yes

  No

  N/A

• Fuel cap tight & vent open.

  Yes

  No

  N/A

• Exhaust system free of leaks. (Gas/diesel units only)

  Yes

  No

  N/A

• Pumps & motor secure, undamaged & free of leaks.

  Yes

  No

  N/A

Hydraulic/Electrical System

• Hydraulic filter clean.

  Yes

  No

  N/A

• All cylinders free of leaks and damage.

  Yes

  No

  N/A

• Hydraulic oil level in tank correct.

  Yes

  No

  N/A

• Hydraulic tank cap tight & vent open.

  Yes

  No

  N/A

• All hydraulic fittings & lines secure, free of damage, chafing & leaks.

  Yes

  No

  N/A

• All electrical connections tight, no corrosion or abrasions.

  Yes

  No

  N/A

Manuals & Decals

• ANSI/SIA Manual of Responsibilities in manual storage box.

  Yes

  No

  N/A

• Operators & Safety Manual in manual storage box.

  Yes

  No

  N/A

• AEM Handbook in manual storage box.

  Yes

  No

  N/A

• Capacity decals in place, secure & legible at both ground & platform stations.

  Yes

  No

  N/A

• All instructions & safety placards installed & legible.

  Yes

  No

  N/A

General

• Lift is free of unauthorized modifications or additions.

  Yes

  No

  N/A

• Paint and overall appearance.

  Yes

  No

  N/A

• Applicable Safety Bulletins completed.

  Yes

  No

  N/A

• Inspect general structural condition including all welds.

  Yes

  No

  N/A

• Grease and lubricate per Service & Maintenance Manual.

  Yes

  No

  N/A

• Is Annual Inspection due?

  Yes

  No

  N/A

• Please write additional comments here.