Title Page
-
Conducted on
-
Prepared by
-
Please take a photo of the "Fire evacuation map" for the floor you are planning to install sensors on (SafetyCulture will use this as a floor plan for performance evaluation purposes)
Gateway
-
Please click the "+" icon to repeat the following set of questions for each of the areas you are planning to install a gateway.
Gateway location #
-
Is there a power point accessible from this location?
-
The gateway requires access to power. Please find a location with power access for optimal gateway operation.
-
Are you considering an Ethernet-enabled or cellular-enabled gateway?
-
Does this location have any known Mobile 'dead-spots'? (i.e. areas where you cannot make calls from your mobile phone)
-
Roughly what percentage is your 4G mobile signal strength at this location?
-
Is there an ethernet connection point in this installation location?
-
The Ethernet gateway requires an Ethernet access point. Please find a location with Ethernet access for optimal gateway operation or consider using a cellular gateway.
-
Is this location above or below ground level?
-
Roughly how far away will the furthest sensor be from this location?
-
Please take several photos (3+) of the location where the gateway will be set up.
Sensors
-
Please click the "+" icon and repeat the following set of questions for each asset you would like to monitor (i.e. each fridge, freezer, room, etc should each have its own set of questions answered)
Sensors Asset #
What is the lowest operating temperature that will be monitored at this asset?
What is the highest operating temperature that will be monitored at this asset?
-
Please include several photos (3+) of the area where this sensor will be installed.
-
Are there any walls, doors, or other objects blocking the line of site to where you will install the gateway?
-
Please take several photos (3+) of the objects blocking the line of sight.
