Information
-
Audit Title
-
Document No.
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
HARNESS IDENTIFICATION
-
Harness Manufacturer<br>
-
Harness Serial Number
-
Date of Manufacture
-
In-Service Date
-
Harness CSA Class: A - Fall Arrest
-
Harness CSA Class: D - Suspension and Controlled Descent
-
Harness CSA Class: E - Limited Access
-
Harness CSA Class: L - Ladder Climbing
-
Harness CSA Class: P - Work Positioning
HARDWARE
-
D-rings<br>Check D-rings for rust or corrosion, distortion, cracks, breaks, and rough or sharp edges. D-rings should pivot freely.
-
Buckles<br>note any unusual wear, damage or distortion. On tongue buckles check that the roller and tongue move freely and that the tongue overlaps the buckle frame. Check the outer and center bars on friction and mating buckles for distortion. On quick release types check for broken plastic and that they will not release when one release is opened. Mating buckles should nest together.
WEBBING
-
Webbing<br>Inspect the entire length of all the webbing looking for frayed edges, broken fibers, pulled stitches, cuts, burns and chemical damage. Also look for mildew, discoloration, hard shiny spots, any webbing that has been marked with a felt pen, excessive hardness or brittleness or the Harness Fall Indicator deployment.
-
Stitching <br>Check all stitching for ripped or pulled stitches and to make sure the webbing joints are not loose. Also look for missing stitching, hard or shiny spots, or discoloration of stitching.
LABELS
-
Inspect to be certain that all harnesses have a label that is legible and securely held in place.
OVERALL DISPOSITION
-
Harness is approved for use at time of inspection.
-
Harness is NOT approved for further use and must be removed from service.
