Information
SHARED SERVICES CREW INSPECTION
-
REC Name
-
REC contact person
-
Conducted on
-
Prepared by
-
Location of inspection (individual report per location)
Person In Charge
CREW MEMBERS
DESCRIPTION OF WORK BEING PERFORMED
JOB PLANNING
-
Employee in charge on site
-
Documented Tailgate - hazards, special precautions, energy source controls, PPE required and employee fitness
-
Any alternative energy sources to be aware of (wind, solar, etc.)
-
Adequate number of crew for the job
-
Weather conditions
-
Terrain conditions in work area
PERSONAL PROTECTIVE EQUIPMENT
-
Is eye protection being worn at all times?
-
Are hard hats used according to procedure manual requirements?
-
Is hand protection being used?
-
Gloves and sleeves (if applicable) worn cradle to cradle, lock to lock, ground to ground and in good condition?
-
Proper rated FR clothing worn?
-
Is hearing protection used when needed?
-
Proper fall protection worn?
-
Add media
VEHICLES, TRAILERS AND EQUIPMENT
-
Boom clean
-
Pre-flight of controls
-
Controls marked
-
Wheels chocked
-
Outrigger pads used
-
Vehicles and equipment grounded per safety manual?
-
Co workers rubber gloves located outside of truck for possible bucket rescue
-
Current DOT inspection
-
Add media
CLIMBING
-
Inspected tools before climbing
-
Long sleeve shirt worn while climbing
-
Hand line used
-
Is Fall Restraint being used when climbing wood structures?
-
Add media
OVERHEAD CONSTRUCTION OR MAINTENANCE
-
Is all equipment inspected prior to use?
-
Is the equipment being used correctly?
-
Are the lines properly de-energized, tested and grounded per safety manual?
-
Are all grounds in good working condition?
-
Are handlines being used?
-
Crew maneuvered loads in a safe manner?
-
Is there good housekeeping?
-
Add media
ENERGIZED WORK
-
Are gloves and sleeves correct rating and date?
-
Are gloves air tested and visually inspected prior to use?
-
Is adequate cover-up material being utilized?
-
Are minimum approach distances being maintained?
-
Is there someone observing employees performing "hot work"?
-
Is company policy followed i.e. rubber glove use? (lock to lock, ground to ground)
-
Are handlines being used?
-
Add media
GENERAL
-
Are slings, handtools, hoist, grips, handlines and all other tools in good working condition?
-
Are chainsaws and proper PPE availible? (chaps, cut resistant boots, eye protection, hearing protection and head protection)
-
Is the work area cleaned when the job is finished?
-
Add media
TRAFFIC CONTROL
-
High visiblility vests worn?
-
Signs used in accordance to traffic control rules and regulations?
-
Cones used in accordance with traffic control rules and regulations?
-
Flagger used when needed?
-
Law enforcement utilized when needed?
-
Flagging done properly?
-
Four way flashers used?
-
Strobe/Rotating light in use?
-
Crew size adequete for proper traffic control?
-
Add media
URD WORK
-
Competent person on job site?
-
Are all excavations evaluated and safe?
-
Adequate trench protection?
-
Means of egress in trench?
-
Spoils 2ft from trench?
-
Used approved device and method when lifting URD equipment (transformers, switchgear, peds etc.)
-
Add media
HOT STICKS
-
Clean and free of moisture?
-
Stored properly
-
Live line tool test date.
-
Add media
Observer
-
Ben Bella