Information

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

  • Audit Title

  • Client/Site

  • Conducted On

  • Prepared By

  • 1.1 - What height is required to be accessed, in metres?

  • 1.2 - What is the horizontal reach required, in meters?

  • 1.3 - Is it required to access sub ground level?

  • 1.31 - If required to access sub ground level, what distance in meters?

  • 1.4 - How much weight is required to be carried in the basket in kilograms?

  • 1.5 - Is power required in the basket?

  • 1.6 - Will the client be using coatings or handling dangerous materials? i.e. Asbestos, Paint, etc.

  • 1.61 - If so what materials will be in use?

  • 2.0 - Potential Machine Setup Location

  • 2.1 - Photos of potential EWP location(s).

  • 2.2 Are there potential hazards in the operation location?

  • 2.21 - Photos of potential hazards.

  • 2.22 - Action required due to potential hazard?

  • 2.3 - Ground conditions?

  • 2.4 - Is the ground level?

  • 2.41 - If the ground is NOT level what is the gradient/angle in degrees?

  • 2.5 - Photos of ground conditions.

  • 3.0 - Site Access.

  • 3.1 - What is the maximum travel height in metres, to access the potential EWP location? (If unlimited, select max.)

  • 3.2 - What is the maximum travel width in metres, to access the potential EWP location? (If unlimited, select max.)

  • 3.3 - Are there weight limits to consider to access & setup safely?

  • 3.31 - What is the weight limitation?

  • 3.4 - Photos of site access.

  • 4.0 - Site Hazard ID.

  • 4.1 - Are the electrical hazards present? i.e. Power lines nearby.

  • 4.2 - Are there any other factors that could be considered a hazard?

  • 4.21 - If any hazards are identified, please take photos.

  • 4.22 - From the hazards, do they require, Engineering, Administration or PPE to eliminate or mitigate?

  • 5.0 - Customer Requests

  • 5.1 - Site Requirements

  • 5.2 - Photos of customer target objectives, showing overview of possible setup locations, target point(s) to reach, existing hazards etc.

  • 5.3 - Describe any factors to customer is requesting or requiring.

  • 6.0 - Machine Suitability

  • 6.1 - Which range of machine do you believe is suitable for the site/job?

  • Size

  • Engine Type

  • Size

  • Engine Type

  • Size

  • Engine Type

  • Size

  • Type

  • Telehandler Attachments?

  • Size

  • *** CHECK VEHICLE TOWING CAPACITY ***

  • 6.2 - Notes relating to site specific items

  • Site Audit Complete

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.