Title Page
-
Document No.
-
Slag Plant
-
Conducted on
-
Prepared by
-
Charleston Mill Service
-
Personnel
-
Ensure belt is centered on Bend, Snub, Tail and Take up Pulleys
-
Ensure rolls are turning & free of buildup
-
Ensure that belt touches all 3 rolls, both loaded and unloaded
-
Inspect Belt for damage and cracking; damaged or worn splices
-
Ensure that all guards are in place
-
Check structure for rusted, bent, broken or missing components
-
Check hand rails, toe boards, walkways and safety gates
-
Note points of spillage while the plant operates
-
Inspect safety switch cables and guides (if applicable)
-
Check condition of scale (if applicable)
-
Check condition of drive belt
-
Check condition of motor
-
Check condition of gear box
-
Check condition of head box
-
Check condition of catch plates
-
Check condition of skirting
-
Check condition of motor leads
-
Check condition of feed chute
-
Check condition of water lines
-
Check condition of bearing conditions
-
Check condition of walkthroughs
-
Check condition of scrapers
-
Add comments if necessary
-
Add signature
