Title Page
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
Select date
-
Check V-Belt Tension
-
Check the tightness of the jaw die bolts
-
Check the sound, temperature (max 167ºF) and grease flow in the eccentric bearings
-
Check protection rubber of the toggle plate. Replace if necessary
-
Check tension and operation of the return rod
-
Check the cond. of the crusher support brakcets, rubber stoppers and rubber dampers. Replace stoppers and/or dampers if necessary
-
Check the general condition of the crusher
-
Check for any wear on the contact surfaces between the side plates and cheek plates
-
Check the pressure of the tension cylinder
-
Check the operation and oil amount in hyd unit. Add if necessary
-
Drive the setting to the minimum and to the max to ensure functioning of the lubrication
-
Check toggle plate for alignment, straightness and cracks. Replace if necessary
-
Check the tightness of the frame tie rods
-
Check the tightness of the frame bolts on the side plates
-
Add comments if necessary
-
Add signature
