Information

  • General Contractor

  • Project Manager

  • General Contractor/Project Name

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Job Trailer/Gang Box

  • First aid kit properly stocked?

  • Emergency phone numbers posted?

  • Fire extinguisher in trailer/fire extinguisher notification posted?

  • Laser & Powder Actuated Tool Warning Placards posted?

House Keeping

  • Trash cans & dumpsters near by empty?

  • Work areas & hallway clean & free of debris?

  • Materials from other trades out of our way?

  • Scraps picked up or stacked out of the way?

  • Toilets clean?

Fire Prevention & Protection

  • Fire extinguisher on site & close to hot work?

  • Fully charged?

  • Inspection date?

  • Flammable storage properly isolated?

  • ANSI approved cans? Clearly marked?

  • Do not store flammables in enclosed space, next to stairways or near an exit.

  • Check gauges for lack of flow.

  • Proper warning signs posted?

  • Adequate fire watch precautions taken?

Electrical

  • Extension cords being connected to a Ground Fault Circuit Interrupter(GFCI) ?

  • Ground plugs intact?

  • Tools grounded or double insulated?

  • Guards are in place?

  • Extension cords are in good conditions?

Scaffold

  • Footing must be sound no 2"x4"s or bricks.

  • Scaffold over 10' requires safety rails or being tied off.

  • Safety rails required on perry's at 6'.

  • All working areas of a scaffold must be fully planked.

  • All braces must be in place.

  • Scaffold sections must be pinned to avoid an uplift.

  • No riding on mobile scaffolds(skate boarding).

  • Base plates must be used when no casters are used.

  • Competent person on site? If no please explain?

  • Identify competent person.

  • All casters must have brakes.

Personal Protection Equipment (PPE)

  • Hard hats being worn?

  • Ear plugs being used?

  • Safety glasses being worn? or side shields used with glasses?

  • Face shield & goggles being used when using chopsaw?

  • Welding hoods have no cracks or scratched lens?

  • Work boots being worn?

  • Sleeves on shirts (3" past shoulders)?

  • Harness-lanyards being used when required? Inspected before each use?

Fall Protection

  • 100% tie off over 6'?

  • Safety rails needed on any open areas exposing a fall hazard?

  • Fall protection being used on articulating aerial lifts?

Ladders

  • All ladders must be tied off & set up to meet the 4 to 1 ratio.

  • Extension ladder extended 3' above ledge.

  • Proper use of a step/A-frame ladder.

  • Ladders must be be placed on a substantial base.

  • Ladders being inspected?

Powder Actuated Tools

  • License for all operators using powder actuated tools.

  • Proper disposal of misfire live rounds?

  • Proper disposal of all used loads?

  • Guns are properly stored?

  • All PPE & ear plugs being worn?

Documentation

  • Supervisor's safety meeting completed once a week?

  • Safety meeting signage sheet & topic turned in?

  • Foreman's daily report turned in?

  • MSDS, Hazcom & Safety Policy located with General Contractor?

  • Near miss reports turned in?

  • Near miss reports turned in?

  • Are accidents turned into the office on the day?

  • Site free of Safety Violation?

Completion of Safety Audit.

  • Corrective actions taken to eliminate any potential hazards.

  • Closing comments.

Superintendent or Forman conducting safety audit.

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.