Information

  • SPM Laser Audit

  • SPMST-LASR

  • Prepared by

  • Conducted on

Section 1.0 Personal Protective Equipment

  • 1.1 Are employees wearing safety glasses?

  • Add media

  • 1.2 Are employees wearing cut protective sleeves?

  • Add media

  • 1.3 Are employees wearing hearing protection?

  • Add media

  • 1.4 Are employees wearing gloves?

  • Add media

  • 1.5 Are welders wearing respirators?

  • Add media

Section 2.0 Housekeeping

  • 2.1 Is work area organized, free of clutter, and trip hazards?

  • Add media

  • 2.2 Are walk areas clear?

  • Add media

  • 2.3 Are blow-off air tool nozzles less than 20 psi?

  • Add media

Section 3.0 Electrical

  • 3.1 Are extension cords free of cuts, abrasions, exposed wiring, or other hazards?

  • Add media

  • 3.2 Are ground pins located on extension cords?

  • Add media

  • 3.3 Are locks and tags used to lockout / tagout machines under service or repair?

  • Add media

Section 4.0 Machine Guarding

  • Section 4.1 Are gears, pulleys, and other moving parts covered with machine guards, cabinets, covers, chains, and sensors?

  • Add media

Section 5.0 Other Hazards

  • 5.1 Are oxygen and flammable cylinders stored more than 20 feet apart and secured?

  • Add media

  • 5.2 Is work area free of other hazards?

  • Add media

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.