SPM Welding 8 Pitfalls

• SPM Welding Audit

• SPMST-WELD

• Prepared by

• Conducted on

  Date

Section 1.0 Personal Protective Equipment

• 1.1 Are employees wearing safety glasses?

• Add media

  Media

• 1.2 Are employees wearing cut protective sleeves?

• Add media

  Media

• 1.3 Are employees wearing hearing protection?

• Add media

  Media

• 1.4 Are employees wearing gloves?

• Add media

  Media

• 1.5 Are employees wearing face shields over safety glasses for grinding activities?

• Add media

  Media

• 1.6 Are welders wearing respirators?

• Add media

  Media

Section 2.0 Housekeeping

• 2.1 Is work area organized, free of clutter, and trip hazards?

• Add media

  Media

• 2.2 Are walk areas clear?

• Add media

  Media

• 2.3 Are blow-off air tool nozzles less than 20 psi?

• Add media

  Media

Section 3.0 Electrical

• 3.1 Are extension cords free of cuts, abrasions, exposed wiring, or other hazards?

• Add media

  Media

• 3.2 Are ground pins located on extension cords?

• Add media

  Media

• 3.3 Are locks and tags used to lockout / tagout machines under service or repair?

• Add media

  Media

• 3.4 Are welding leads covered for both burn and cut protection?

• Add media

  Media

Section 4.0 Machine Guarding

• Section 4.1 Are hand tools used to retrieve parts from saw(s)?

• Add media

  Media

Section 5.0 Other Hazards

• 5.1 Are gases stored within welding carts and capped after use?

• Add media

  Media

• 5.2 Is work area free of other hazards?

• Add media

  Media