Information
-
JOB AUDIT TITLE INCLUDING JOB NUMBER
-
CLIENT /SITE
-
ENGINEER
-
Conducted on
-
Location
-
Prepared by
LIFT DETAILS
-
Enter Lift Make / Lift Model and Serial Number
LUBRICATION CHECKS
-
Lubricate all hinges on Chairlift
-
Lubricate Swivel Seat / Safety Carriage Up and Down Hinges
-
Vacuum and Lubricate Chain Drive / Rack and Pinion / Clean Aluminium Track with Dry Cloth
-
Lubricate Internal Rollers inside Carriage
-
Lubricate Foot Rest Hinges
-
Lubricate Safety Belt Joints / Check for damage and Is Safety Belt locked in closed position?
-
Lubricate Folding Armrests
-
Inspect Training Cable for wear
SAFETY SWITCHES - DO THEY OPERATE CORRECTLY
-
Foot Rest Trip Switches both directions (Safety Edges)
-
Carriage Safety Pads upper / lower
-
Swivel Seat Switch
-
Key Switch on / off
-
Armrest directional switches ( up / down constant pressure type)
STAIR LIFT CHECKS
-
Check all Floor Fastening Anchorage Points
-
Park Carriage at top and bottom post editions, Are the charging points working?
-
Park Lift away from charging points, Does it Beep?
-
Turn Off and check battery voltage level, is this correct?
-
Is fault code display working?
-
Is a warning for load fitted to stair lift ( one person 127 KG)
-
Do the remote control units operate correctly? ( Change batteries every six months)
-
Will Stair Lift stop automatically at ends of travel on normal stopping limits?
-
Is the brake stopping the carriage correctly?
-
Will the final limit switches operate correctly?
-
Does the swivel seat lock in the 45 - 90 degree position and is it mechanically locked in these positions?
-
Switch off power supply, Does the Stair Lift beep? ( Turn off isolation switch, Does Beeping Stop?)
-
Is over speed Governor working correctly?
-
Will Safety Gear engage correctly?
-
Are there electrical diagrams on site?
-
Is the customer operating manual on site ( Fault Codes)
-
Is there a hand winding wheel on site?
-
Will the hand winding wheel work correctly
-
Is there a warning sign fitted to the hand winding wheel (not to be left connected)
LOG CARD
-
Sign and Date Log Card
NOTES and RECOMMENDATIONS
-
NOTES
-
RECCOMMENDATIONS
-
PLEASE TAKE ANY ADDITIONAL PHOTOS IF REQUIRED
ENGINEERS SIGNATURE
-
Engineer - Please Print Name and Sign
CUSTOMERS SIGNATURE
-
This equipment has been serviced in accordance with the contract and has been left in a satisfactory, safe and serviceable condition.
-
Customers - Please Print Name and Sign