Title Page
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Personnel
Stair safety maintenance check
-
Click add to start first stairway
Add stairway to checklist
-
Enter stairway location
-
What are the stairs constructed from
-
Please describe
Handrail compliance and safety
-
Is there a hand rail on the stair?
-
Australian standard specifies every stairway must be provided with at least 1handrail
-
Does the stairway's width exceed 1000mm
-
Is there a handrail on each side of the stairway?
-
Australian standards specify that stairways exceeding 1000mm shall have a handrail on each side
-
For stairways to comply they must have a handrail with no obstruction above them and be between 865mm and 1000mm above the top of the step
-
Is the handrail free of obstructions on or above that would break your hand hold?
-
Handrails must be clear of obstructions above or on that could break your hand hold
Stair treads
-
Each stair height should be between 115mm and 190mm
-
The value of 2x the riser plus the length of the going should be between 550 mm and 700 mm for design compliance. Refer to a specialist for advice.
-
Check if there is a "visual" strip on the front edge of the steps
-
Is this strip in good condition, if no please comment
-
Visual strips are to assist visually impaired persons, current design rules require this strip but it is not retrospective, consider installing visual nosing strip
-
General condition of the stairs
Rails of the stairs
-
Are the hand rails securely attached?
-
Are the handrails in good condition without rust, splinters and cracks?
General condition of steps
-
Do the the steps appear sound and secure, with no loose bricks or treads?
-
Are the steps free of chipped nosing
-
Is the stairway free of other issues in need of attention