Steel Reinforcement Critical Stage Inspection

• Inspection date:

  Date

• DA Number:

• CC / CDC Number:

• Address of inspection:
  Address

• Inspection Result

  Select The inspection was satisfactory Work/certificate required - no reinspection needed Work required - reinspection required within 30 days Stop works immediately and contact Council officer

  • The inspection was satisfactory
  • Work/certificate required - no reinspection needed
  • Work required - reinspection required within 30 days
  • Stop works immediately and contact Council officer

• Inspection able to be completed?

  Yes

  No - job not ready.

  No - access not available

• Complete footings / steel reinforcement and re-book inspection prior to pouring.

• Provide access to the site and re-book inspection.

• Full or partial inspection undertaken?

  Full Inspection

  Partial Inspection

General

• Is the site adequately fenced or access to site appropriately restricted?

  Yes

  No

  N/A

• Fence off or restrict unauthorised access to the site in accordance with SafeWork NSW and WHS Regulation requirements.

• Is the site clean?

  Yes

  No

  N/A

• Remove all rubbish and waste from the site.

• Is the site free of undue hazards?

  Yes

  No

  N/A

• Are sediment and erosion controls satisfactory?

  Yes

  No

  N/A

• Provide sediment and erosion controls on site in accordance with the requirements of the development consent and any stamped approved plans.

• Are appropriate facilities provided for workers?

  Yes

  No

  N/A

• Does the site have appropriate builder's signage and Principal Certifier signage?

  Yes

  No

  N/A

• Provide Principal Certifier / builder's signage in accordance with the requirements of the development consent and Clause 98A of the Environmental Planning and Assessment Regulation 2000.

• Validation certificate required for imported fill?

  No

  Yes

  N/A

• Are all applicable development consent conditions being complied with?

  Yes

  No

  N/A

Footings / Steel Reinforcement Inspection

• Is the vapour barrier complete and intact?

  Yes

  No

  N/A

• Are all earthworks / formworks consistent with the stamped approved plans?

  Yes

  No

  N/A

• Is the reinforcement steel size in accordance with the approved details?

  Yes

  No

  N/A

• Is the reinforcement steel adequately lapped?

  Yes

  No

  N/A

• Are all piers / footings free of debris and water?

  Yes

  No

  N/A

• Clear all piers / footings of all debris and/or water prior to pouring.

• Is the formed slab / building element within peg out area?

  Yes

  No

  N/A

• Is all steel reinforcement adequately tied?

  Yes

  No

  N/A

• Is all steel reinforcement adequately chaired?

  Yes

  No

  N/A

Additional requirements

• Additional Requirements?

  No

  Yes

Inspection completed by:

• Signature:

  Sign

• BPB accreditation number: