TELE-HANDLER PER-SHIFT INSPECTION REPORT

• Document No.

• Client / Site BMI / Coventry

• Conducted on

  Date

• Prepared by

PRE-SHIFT INSPECTION: Before use each day or at the beginning of each shift, Tele-handler shall be given a "walk-round" visual inspection as a daily requirement before operating this machine.

• DAILY INSPECTION CHECK LIST

• BEFORE ENTERING OPERATOR'S CAB:

• 1. Windows & mirror(s) are clean and undamaged; and properly adjusted for operator's view.

  Pass

  Fail

  N/A

• 2. Engine oil Level

  Pass

  Fail

  N/A

• 3. Hydraulic oil level

  Pass

  Fail

  N/A

• 4. Air filter restriction indicator. if needle is in red area filter is clogged and element must be cleaned or changed.

  Pass

  Fail

  N/A

• 5. Tire and wheels.

  Pass

  Fail

  N/A

• 6. *Heater, defroster and windshield wiper.

  Pass

  Fail

  N/A

• 7. *Operating lights and rotating beacon.

  Pass

  Fail

  N/A

• 8. Voltmeter should show 13.5 to 14 Volts.

  Pass

  Fail

  N/A

• 9. Observe Oil Pressure Gauge (Low idle 10 psi / 69 kPa)

  Pass

  Fail

  N/A

• WHEN ENGINE WARMS TO OPERATING RANGE, CHECK:

• 10. Transmission fluid level.

  Pass

  Fail

  N/A

• 11. Service brake and parking brake.

  Pass

  Fail

  N/A

• 12. Forward and reverse travel.

  Pass

  Fail

  N/A

• 13. Each of the gear ranges.

  Pass

  Fail

  N/A

• 14. Steering (in both directions) with engine at low idle. Check in each steering mode.

  Pass

  Fail

  N/A

• 15. Horn and back-up alarm. Must be audible from inside operator's cab with engine running.

  Pass

  Fail

  N/A

• 16. All boom and attachment functions - operate smoothly and correctly.

  Pass

  Fail

  N/A

• COMPLETE ALL REQUIRES MAINTENANCE BEFORE OPERATING UNIT. SUPERVISOR:

  Sign