Title Page
-
Conduced on
-
Location
-
ATS
-
TECHNICIANS INFORMATION
- Gomez Ronald
- Quezada Antonio
- Huapaya, Jose
- Misaico, Raul
- Torres, Jesus
- Saenz, Carlos
-
Automatic transfer switches (ATS)
1. Transfer switches are required to be operated monthly [see NFPA 110(10), Sec. 8.4.6; see also: MSFC(15), Sec. 604.3.3].
2. This monthly test must consist of electrically operating the transfer switch from the normal/standard position to the alternate position and then a return to the normal/standard position [see MSFC(15), Sec. 604.4.1; NFPA 110(10), Sec. 8.4.6.1].
o In many cases, a “Transfer Test” switch or button is provided and can be used to perform this test.
TESTING GENERATOR - NFPA 110 Sec. 8.4.6 / ATS UTILITY
-
Attach photo of ATS
-
Pre-Test Inspection
INSPECTION
-
1. Inspection start hour
Control Module
-
1. Operational control lights<br>working?
-
2. The control module is free of alarms?
-
what is the alarm? Describe
Electrical System
-
1. Are the circuit breakers and fuses OK?
-
2. Selected generator
-
3. Are there signs of overheating of cables or connections? (ie "hot spots").
-
3.1 Reading temp (Load):
-
3.2 Reading temp (Emergency):
-
3.3 Reading temp (Normal):
-
4. Are the connections in good condition?
-
5. Are the open-type relay contacts and mechanically operated auxiliary contacts in good condition?
-
6. Are the "NORMAL" and "EMERGENCY" indicator lamps working properly?
TESTING
-
ATS log during testing
-
1. Test with load?
-
2. Test start time
-
3. Time the test ended
-
4. Time delay for transfer to emergency (TDNE)
-
5. Time delay emergency to normal (TDEN)
-
6. Is any alarm or fault displayed during synchronization?
-
Describe
-
7. Was power restored without problem?
-
Describe the problem.
ATS Record for every hour of testing
1. ATS - 2 (Utility)
-
1.1. Hour
-
1.2. Voltage L-L
-
1.3. Voltage L-N
-
1.4. Amps
-
1.9. P.F.
2. ATS - E2 (Utility)
-
2.1. Hour
-
2.2. Voltage L-L
-
2.3. Voltage L-N
-
2.4. Amps
-
2.9. P.F.
Comments and observations
-
1. Add observations?
-
Describe
-
2. Add comments and recommendations
-
Describe
Completion
-
Click "Add FAC Tech"
FAC Tech
-
Name & Signature