Information
-
UTV Pre Inspection Form
-
Job Site
-
Conducted on
-
Prepared by
-
Location
-
Walk around inspection - (Look around and under the vehicle for such items as loose bolts, trash build up, oil or coolant leaks, broken or worn parts)
-
Check fuel - Turn key switch to “ON” check amount of fuel by fuel gauge, Fill when less the 1/4
-
Check engine oil - Check oil before starting engine or at least 5 minutes after engine has stopped. Never mix two different types of oil
-
Check transmission fluid
-
Check brake fluid level - Never operate if brake fluid is below the “MIN” mark. Use only Kubota DOT3 brake fluid. If fluid is spilled on the power steering hose, quickly wash it off with water, brake fluid ruins rubber hoses
-
Check coolant level (Raise seat)
-
Clean grill/radiator screen (Raise seat) Detach the screen and remove all foreign materials
-
Check brake and speed control pedal - Ensure free travel and smooth operation
-
Check parking brake - Ensure when brake is applied the corresponding light illuminates on the instrument cluster
-
Check indicators, gauges and meter
-
Check lights
-
Check seat belts
-
Check front and rear joint boots - Check boots for cuts, cracks or deterioration
-
Check tire pressure
-
Check backup alarm
-
Check DANGER, WARNING CAUTION Labels
-
Inspection Completed By:
