Title Page
-
Sperry Marine
-
Department
-
Address
-
Prepared by
-
Conducted on
Visual Inspection Report Form
-
Instructions:
1. List all the parts to be visually inspected by tapping “Add Part”
2. Indicate its ID and location and take/attach photos of the part.
3. Select pass or fail based on the part’s defect criteria below: -
(This is an example of how you can use iAuditor to include best practice reference images in your templates to assist with inspections.)
-
4. For parts with visual defects, choose from the dropdown menu the exact failed item/s based on defect criteria.
5. You may put additional observations, then digitally place your signature to finish the visual inspection.
Part
-
ID & Location
-
Take/attach photos
-
Defect Criteria
-
Identify visual defect/s.
- Cracks
- Incomplete penetration
- Incomplete fusion
- Porosity
- Burn through
- Under cut
- Suckback
- Weld reinforcement
- Arc strikes
- Weld size/profile
- Other
Completion
-
Additional Observations
-
Quality Assurance Inspector Name & Signature