108 IQA Feedback and Checklist Sheet

• IQA Date

  Date

• IQA Assessor

• Student

• Assessor

• For 5357-23/94 has at least 1 job been done on a non domestic property?

  Yes

  N/A

• Has this unit been fully sampled?

  Yes

  No

Terminate and connect cables and conductors in accordance with manufacturers’ instructions, wiring regulations and any relevant drawing or specification (Assess a minimum of four from the following)

• Has a minimum of 4 cables/conductors been terminated?

• Which 4

  Select Single core (singles) Multicore insulated PVC – PVC flat profile cable MICC Fire performance SWA cable GSWB galvanised steel wire braid Data

  • Single core (singles)
  • Multicore insulated
  • PVC – PVC flat profile cable
  • MICC
  • Fire performance
  • SWA cable
  • GSWB galvanised steel wire braid
  • Data

Connect to electrical equipment in accordance with manufacturers’ instructions, wiring regulations and any relevant drawing or specification (Assess minimum of five from the following)

• Has a minimum of 5 different pieces of equipment been connected too?

• Which 5

  Select Isolators/switches Socket outlets Distribution boards/consumer control units Luminaires Electric motors/motor control equipment Overcurrent protective devices Earthing terminals Control panels Data socket outlets or data connections Fire detection/alarm components Other appropriate equipment

  • Isolators/switches
  • Socket outlets
  • Distribution boards/consumer control units
  • Luminaires
  • Electric motors/motor control equipment
  • Overcurrent protective devices
  • Earthing terminals
  • Control panels
  • Data socket outlets or data connections
  • Fire detection/alarm components
  • Other appropriate equipment

• Please state.

Terminate and connect conductors using appropriate methods (Assess minimum of two from the following)

• Has a minimum of 2 different connection methods been used?

• Which 2

  Select Screwing Crimping Soldering Non-screw compression Insulation displacement

  • Screwing
  • Crimping
  • Soldering
  • Non-screw compression
  • Insulation displacement

Assessor Feedback and Planning

• Has assessor feedback and planning been given to the learner.

Expert Witness

• Has the evidence been signed off by an expert witness?

• Expert Witness Name

Feedback To The Assessor

• Feedback for the Assessor

IQA Signature

• I have sampled this evidence as part of my verification sample.

  Sign