Title Page

  • Conducted on (Date and Time)

  • Inspected by

  • During this inspection, all Fire Doors and Fire Escape Doors will be tested to ensure they comply with the minimum standards required.

    At any point, a failure must be reported immediately to the IMS Manager for rectification.

Fire Door Resistance Inspections

Training Room Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Staff Canteen Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Staff Area Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Reception Stairs Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Warehouse Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Secure Stores Doors

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Tech Workshop Doors

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Comms Room Doors

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Tech Clean Area Doors

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Tech Office Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Secure Project Office Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Upstairs Corridor Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Boardroom Door 1

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Boardroom Door 2

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Sales Office Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Finance Office Door

  • Is the automatic door closer working well enough to fully shut the door after egressing through it normally?

  • Is the handle in good working condition?

  • Is the latch depressing and returning as expected?

  • Are the intumescent strips in good condition?

  • Are all door hinges working as expected?

  • When the door is closed, is the gap between door and frame a maximum of 3mm?

  • Does the door bear a 'Fire Door Keep Shut' Sign on both sides?

Fire Escape Inspections

Technical Office Fire Escape Door

  • Is the push to exit bar in good working condition with little resistance when pushed?

  • Does the door bear a 'Fire Escape Keep Clear' Sign on both sides?

  • Is the Fire Escape door free from any obstructions internally?

  • Is the Fire Escape door free from any obstructions externally?

  • Are all door hinges working as expected?

Demo Room Fire Escape Door

  • Is the push to exit bar in good working condition with little resistance when pushed?

  • Does the door bear a 'Fire Escape Keep Clear' Sign on both sides?

  • Is the Fire Escape door free from any obstructions internally?

  • Is the Fire Escape door free from any obstructions externally?

  • Are all door hinges working as expected?

Reception Fire Escape Door

  • Is the push to exit bar in good working condition with little resistance when pushed?

  • Does the door bear a 'Fire Escape Keep Clear' Sign on both sides?

  • Is the Fire Escape door free from any obstructions internally?

  • Is the Fire Escape door free from any obstructions externally?

  • Are all door hinges working as expected?

Bottom of Stairs Fire Escape Door

  • Is the push to exit bar in good working condition with little resistance when pushed?

  • Does the door bear a 'Fire Escape Keep Clear' Sign on both sides?

  • Is the Fire Escape door free from any obstructions internally?

  • Is the Fire Escape door free from any obstructions externally?

  • Are all door hinges working as expected?

Staff Room Fire Escape Door

  • Is the push to exit bar in good working condition with little resistance when pushed?

  • Does the door bear a 'Fire Escape Keep Clear' Sign on both sides?

  • Is the Fire Escape door free from any obstructions internally?

  • Is the Fire Escape door free from any obstructions externally?

  • Are all door hinges working as expected?

Sign-off

  • Final Comments on Fire Door Condition:

  • Safety Recommendations for Fire Doors:

  • Signed:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.