Title Page
-
Conducted on
-
Prepared by
-
Location
W&D - General
-
1. Check spindle firm fit.
-
2. Check safety devices.
-
3. Clean the machine of adherent oil, grease, dirt & paper dust.
-
4. Vacuum-clean the fan filters in the control cabinets or replace them.
-
5. Check the green chain guides for signs of wear and clean them.
-
6. Check the driving chain at the tensioning box for tension.
-
7. Check all chains and chain wheels for signs of wear.
-
8. Check function of the adjustment device of the guide brackets.
-
9. Check the brake brush for wear.
-
10. Perform visual inspection of the dam rollers for damage.
-
11. Visual inspection of the toothed belts, suction belts and transport belts for wear, replace if necessary.
-
12. Check rubber coating of the cross conveyor's rollers for wear.
-
Comments:
W & D - Envelope Feeder
-
1. Perform visual inspection of the can roller for damage.
-
2. Check the revolving springs for tension and fatigue. To this purpose, the gripper fingers have to be swiveled manually in order to check the tension of torsion springs.
-
3. Visual inspection of the vacuum suction cups & grippers for wear.
-
4. Visual inspection of the transport belts for wear.
-
Comments:
W & D - Envelope Auto Loader
-
1. Blow off the machine w/compressed air for cleaning.
-
2. Visual inspection of the transport belts for wear.
-
3. Check the mini worm gear motor for leaks.
-
Comments:
W & D - Vacuum Closing Section
-
1. Check the suction belts for wear, replace if necessary.
-
2. Clean the sponge in the water reservoir.
-
Comments:
W & D - Gathering Section
-
1.Filter /Vacuum-clean or replace.
-
Comments:
W & D - HF2 Feeder
-
1. Filter & Filter housing / replace the filter.
-
2. Reflector / Clean, Replace if damaged. Fig. 3
-
3. Reflector / Clean, Replace if damaged. Fig. 9
-
4. Vacuum ejectors / Clean the filter.
-
5. Toothed Belt / See manufacturer's instructions.
-
Comments:
W & D - SF2 Shuttle Feeder
-
1. Reflector / Check for damage, replace if necessary.
-
Comments:
W & D - Touch Screen
-
1. Toothed wheel on the drive shift / Spray free-running toothed wheel after cleaning.
-
Comments:
W & D - Envelope Feeder
-
1. Toothed belt / Check tensioning
-
2. Toothed belt / Visual check for wear, replace if necessary.
-
Comments:
W & D - Envelope Feeder / Vacuum Closing Section
-
1. Spring valve (Krautzberger, type. Micro 3): See manufacturer's instructions.
-
Comments: