ABN Group (Vic) Contractor Pre-start Site Checklist and SWMS

• Site Address

• Company Name

• Date Prepared

  Date

• Prepared by

Induction and Training

• Trade Induction Pack completed and on site?

  Yes

  No

• What is the reason for not having the induction pack on site?

• All workers on site have completed the ABN Group Induction and signed the Pack?

  Yes

  No

• Ensure all workers have read and signed the Trade Induction Pack before commencing work.

Hazard Assessment

• Do you have a generic Safe Work Procedure (SWP) for the works that you do?

  Yes

  No

• Please complete the SWP template located on page 26 of the Trade Induction Pack

• For works on the upper floor of a double storey home

• Is the void platform in place and all window and door openings barricaded?

  Yes

  No

• Contact the Site Manager to rectify or install barricades before commencing work.

• Have any hazards been identified on this site which may affect your ability to work to your SWP?

  Yes

  No

• Please complete a site specific SWMS in the next section before commencing works.

• Will you be completing any works that are deemed High Risk?<br>High Risk works include;<br>Working at a height above 2 metres<br>Working with Mobile Plant or Equipment (concrete pumps, excavators, etc.)<br>Working in excavations deeper than 1.5 metres

  Yes

  No

• Please complete a site specific SWMS in the next section for High Risk works before commencing.

Compliance

• All electrical equipment and leads are tested, tagged and up to date?<br>RCD boxes are tested monthly?

  Yes

  No

• DO NOT USE ANY UNTAGGED OR OUT OF DATE EQUIPMENT ON SITE!

• Does the work involve the use of Mobile Plant?

  Yes

  No

• Plant or Equipment is regularly serviced and maintained and a pre-start operational check has been completed?

• Will you be using any Hazardous Substances?

  Yes

  No

• Are Safety Data Sheets available for review or in case of an emergency?

  Yes

  No

• Ensure that you have access to Safety Data Sheets for Hazardous Substances, these are available from the supplier.

Safe Work Method Statement

• Use this SWMS if you are completing High Risk works or if hazards outside the scope of your Safe Work Procedure have been identified.

• Works to be completed

• Type of Safe Work Method Statement

  Site Specific SWMS for High Risk work

  Site Specific SWMS for identified hazards

• List all High Risk tasks, the hazards associated with the tasks and how the hazards will be controlled.

High Risk Tasks

• Task

• Associated Hazards

• Implemented Controls

• List all the hazards that are not covered by your Safe Work Procedure and how you are going to control them

Identified Hazards

• Identified Hazard

• What will you put in place to control the hazard?

DECLARATION BY SITE WORKERS INVOLVED IN THE WORK ACTIVITY

• 1. I have reviewed and been given the opportunity to comment on the content of the company's SWP.
  2. I have read and understand how I am to carry out the tasks listed in the SWP.
  3. I have read and understand the requirements set out in the ABN Group's trade Induction Pack.

Worker

• Name, Date and Signature

  Sign