Title Page

  • Automaticly Generated Document No.

  • Asset No.

  • Conducted on

  • Prepared by

  • Personnel

  • Location
  • Capture.JPG

Device: Wireless Access Points, Repeaters, Wireless Radios & Clients. Activities: Ensure pedestals and all pole mounted equipment is intact, secure and undamaged.

  • 1. Ensure pole is secure at base and tighten rag bolts as necessary.

  • 2. Inspect and ensure locks, where fitted, are secure.

  • 3. For hinged poles ensure counterweight is secure and pole operation is smooth and balanced.

  • 4. Inspect all pole‐mounted equipment and tighten bolts.

  • 5. Repair or replace all faulty, damaged or missing fixing accessories (i.e. brackets, washers, nuts and bolts etc.)

  • 6.Inspect earth bonding and enclosure finish.

  • 7. Inspect and ensure VicRoads stickers are intact and legible.

Devices: Wireless Access Points, Repeaters, Wireless Radios & Clients. Activities: Ensure all wiring and cabling is securely connected and supported.

  • 1. Inspect for loose wires on all accessible terminals, and re‐terminate and tighten.

  • 2. Inspect and ensure all cable supports are secure and in proper working order.

  • 3. Inspect and ensure proper operation of radio.

  • 4. Inspect and ensure that all communication connections are secure, clean and free of corrosion.

Device: Wireless Access Points, Repeaters, Wireless Radios & Clients. Activities: Check battery and Solar power unit condition.

  • 1. Inspect and ensure optimum operation of batteries; (where installed). <br>Inspect and ensure batteries maintain charge sufficient for continuous operation 24 hours, 7 days a week.

  • 2. Check battery terminals for corrosion and re-coat with sealing agent if required.<br>

  • 3. Inspect and ensure optimum operation of the solar charge control module (where installed). <br>Arrange vegetation trimming to keep solar panel uncovered.

Device: Wireless Access Points, Repeaters, Wireless Radios & Clients. RM Activities: Ensure proper operation of communication facilities.

  • 1. Inspect and ensure RX/TX communication.

  • 2. Inspect and ensure optimum operation of radio equipment (where installed).

  • 3. Inspect and record received signal strength, ensure optimum alignment of antenna (where installed)

Completion

  • Add signature

  • Select date

  • QA Completion Photo

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.