Pit, Pipe & Fibre Optic Network RM Check-sheet

• Automatically Generated Document No.

• Asset No.

• Conducted on

  Date

• Prepared by

• Personnel

• Location
  Address

Devices: Fibre Optic Network RM Activities: Inspect pits, fibre optic cables and underground enclosures.

• 1. Inspect, repair or replace defective pit lids and concrete surrounds.

  Yes

  No

  N/A

• 2. Check cable identifiers and rectify as required.<br>

  Yes

  No

  N/A

• 3. Ensure earth connections for vermin proof fibre optic cables are in good condition.

  Yes

  No

  N/A

• 4. Ensure pits are free of water and rodent presence.

  Yes

  No

  N/A

• 5. Check spreader bars.

  Yes

  No

  N/A

• 6. Check pit bolt.

  Yes

  No

  N/A

• 7. Check nameplate.

  Yes

  No

  N/A

• 8. Check and ensure that fibre enclosure is fastened.

  Yes

  No

  N/A

Devices: Fibre Optic Network RM Activities: Inspect network switches and modems.

• 1. Check all switches and modem fans and ensure normal operation.<br><br>

  Yes

  No

  N/A

• 2. Ensure cleanliness of all equipment.<br>

  Yes

  No

  N/A

Devices: Fibre Optic Network RM Activities: Check all patch cables, pigtails, patch panels, connectors and termination boxes.

• 1. Inspect for loose connections on all accessible terminals, re‐terminate and tighten if required. <br>Make sure that all cables are in clean and tidy condition.

  Yes

  No

  N/A

• 2. Ensure all termination boxes are free of dust and moisture. <br>Manufacturers’ IP rate must be maintained under any circumstances.

  Yes

  No

  N/A

• 3. Inspect and ensure all fibre optic harnesses are well supported and are not kinked or bent.

  Yes

  No

  N/A

• Add signature

  Sign

• Select date

  Date

• QA Completion Photo

  Media