AHU/FCU's in Very High Risk Areas

• AHU/FCU's IN VERY HIGH RISK AREAS - MONTHLY MAINTENANCE

• Location
  Address

• Conducted on

  Date

• Campus

• RMH City Campus

  Royal Park Campus

• Completed By

• Tim Walker

  Shane Paterson

  Scott Ingram

  Nic Ashton

• Document No.

• Select John Cade Materials Handling 1B Main Block Outpatients CMR Clinical Sciences Bldg 1A Allied Health Infill/Centre Block

  • John Cade
  • Materials Handling
  • 1B
  • Main Block
  • Outpatients
  • CMR
  • Clinical Sciences Bldg
  • 1A
  • Allied Health
  • Infill/Centre Block

• Select B G 1 2 3 4 5 6 7 8 9 10 11 12 Roof

  • B
  • G
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • Roof

• AHU/FCU Description (eg AHU 3W)

• Plant Room Asset Number (if AHU)

• Room Number (if AHU)

• AHU/FCU Asset Number

Plantroom

• Plantroom free from rubbish and safe to enter

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Outdoor air intakes and exhaust air outlets

• Undertaken inspection and cleaning as required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Heating and cooling coils

• Undertaken inspection and cleaning as required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Drip trays, drains and drain traps

• Inspect and prime with water as required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Fan Belts

• Belt tension, wear to be checked. Adjust or replace as required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Pulleys

• Damage, wear to be checked. Record and replace as required.

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Drive and drive shaft guard

• Ensure firmly in place. Adjust as required.

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Fan

• Ensure fan operates and is free of vibration, bearing noise and overheating. Record and replace as required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Fan Hold Down Bolts

• Check mounts and hold down bolts for security

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Motor bearings

• Inspect motor bearings for noise and temperature

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Filters

• Inspect filters. Determine if maintenance required.

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Mechanical Boards

• Check board is free from faults and perform lamp test to check all lights working

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Electrical Connections

• Check all electrical connections and associated wiring

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Lubrication

• Lubricate motor bearings where required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Filter Air Leakage

• Check to ensure no air leakage around filter media

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Flexible Connections

• Check condition of any flexible connections and report

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

AHU doors

• Check AHU doors and fastenings

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Insulation

• Ensure insulation is secure

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Lights

• Replace defective lights

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Dampers

• Check all damper linkages and operation

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Electric Motor Amps

• Check electric motor maximum duty amps against nameplate

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Automatic bearing lubricators

• Check automatic bearing lubricators and report

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Excess Lubricant

• Remove and clean ant excess lubricants / greases from bearings

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

BAS Alarms and Faults

• BAS alarms and reported faults ok?

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Manual Overrides

• Check that manual overrides are set in automatic

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Time Schedules

• Check time schedules are current and adjust if necessary

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Temperatures

• Check temperatures on floors, in rooms or in any areas requiring special conditions

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Pressure Controls

• Check pressure controls where applicable on floors, in rooms or in any areas requiring special conditions

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Actuators

• Check actuators and controls for physical damage

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Lubrication

• Lubricate spindles and linkages where required

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

Correct Operation

• Check all controls for correct operation

  Yes

  No

  N/A

• Send to WOMS

  Yes

  No

  N/A

• Items to follow up? Write details.

• Add signature

  Sign