Information
-
Daily Pool Test WE
-
Club Alamanda
-
2-10 Paradise Prde, Point Cook, 3030
Daily Pool Test WE
-
undefined
- Less than 1 - Acceptable
- Greater than 1 - Not acceptable contact pool contractor
- Pool Test
-
Pool Test Conducted at:
-
Staff Member:
- Ana Krizanic
- Manuel Fuentes
- Wyatt Alatipi
- Morgan Emerson
- Brooke Da Silva
- Hannah Billington
- Aaron Fry
- Craig Morris
- Sammie Nguyen
- Vlatka Zboril
- Pragya Srivastava
- Jules Boyes
- Amanda Wallis
- Amanda Jordan
Chemical Feeder Readings
-
Pool Temperature
-
Minerals - test manually Mon, Wed & Fri. If under 3.30 please add minerals
-
Cl PPM
-
pH
Pool Temperatures
-
Temperature toddlers pool (degrees Celsius)?
-
Temperature main pool ((Deep End)degrees Celsius)?
Pool Water Test Readings
-
When testing results should be compared with Australian Standard acceptable levels. Any levels outside of Australian standards should be reported to the pool contractor and corrective measures taken under guidance from them.
-
Free Chlorine - Australian Standard Minimum level 1 mg/L Minimum 2mg/L in summer
-
Free Chlorine reading is within Australian Standards
-
Total Chlorine - Australian Standard maximum level 10 mg/L
-
Total Chlorine reading is within Australian Standards
-
Total chlorine minus free chlorine result is
- Less than 1 - Acceptable
- Greater than 1 - Not acceptable contact pool contractor
-
pH
-
pH reading is between 7.2-7.8 as per Australian Standards
-
Alkalinity (tested only weekly - Friday's)
-
Is the alkalinity between 60 and 150ppm?
-
Cynauric Acid (tested only weekly - Friday's)
-
Is the Cyanuric Acid reading between 25-35?
-
Calcium Hardness (tested only weekly - Friday's)
-
Is the Calcium Hardness reading between 180-350?
Pool Area Inspection
-
Pool gate
-
Skimmer baskets clear of debris?
-
Pool water level is safe (Safe water level is above the base of the skimmer box)?
-
Children's pool blower pump operational?
-
Perimeter fence safe?
-
Pool rescue equipment present and undamaged ( float and reach pole)?
Pump equipment checks
-
Has the Micron filter been cleaned (Friday task)
-
Baxi heater running correctly?
-
Do any of the pumps require backwash? Backwash pressure 180 kPa.
-
Before backwashing the filter closest to the dosing system (Filter 1). Ensure that the blue valve is closed (picture shows the valve in the open position). Once the back was is completed open it again.
-
Pool pump baskets clear of debris?
Other Issues or Problems
-
Any other issues sighted or noted?
Signatory
-
I hereby advise that the records above are true and correct.