Information

  • Conducted on

  • Prepared by

AM

  • Checked engine oil level?

  • Next question.

  • Select amount of engine oil added.

  • Next question.

  • Take photo and contact Steve.

  • Is engine oil visible in the bilge area under the engine?

  • Stop, contact Steve immediately!

  • With engine running, is there an oil slick or sheen on top of the water behind the boat?

  • Stop, contact STEVE immediately!

  • Stop, contact Steve immediately!

  • Checked power steering fluid?

  • Next question.

  • Is there steering fluid in bilge?

  • With engine running, is there an oil slick visible behind the boat?

  • Take photo and contact STEVE immediately!

  • Take photo, contact STEVE immediately!

  • Take photo, contact STEVE immediately!

  • Fuel tanks topped off?

  • Next question.

  • Turn in receipt, now.

  • Checked Power Tilt & Trim Fluid?

  • Next question.

  • Take photo, contact STEVE immediately!

  • Did you ensure the drive is down prior to adding fluid?

  • After putting the drive down, check levels.

  • Next question.

  • Is there fluid visible in the bilge?

  • Take photo, contact STEVE immediately!

  • While trimming drive up and down, is there an oil slick behind the boat?

  • Take photo, contact STEVE immediately!

  • Call STEVE!

  • Is there fluid visible in the bilge?

  • Take photo, contact STEVE immediately!

  • While trimming drive up and down, is there an oil slick behind the boat?

  • Take photo, contact STEVE immediately!

  • Call STEVE!

  • Checked outdrive oil/gear lube?

  • Next question.

  • Take photo, contact Steve immediately!

  • Select how much gear lube needs to be added.

  • Add gear lube. Continue to next question.

  • Is this the first day you have had to add gear lube?

  • Next question.

  • Contact Steve!

  • Is there oil visible in the bilge?

  • Take photo, contact Steve immediately!

  • With engine running, is there an oil slick visible behind the boat?

  • Take photo and contact Steve immediately!

  • Contact Steve!

  • Checked winch (visual inspection)?

  • Continue to next question.

  • Elaborate the problem. (Metal shavings, loose bolts, etc)

  • Fix problem or call Steve! Continue to next question.

  • Checked level wind, tighten chain and grease?

  • Next question.

  • Take photo.

  • Elaborate problem. (Metal shavings, can't tighten chain, rollers not turning, etc.)

  • Fix problem or contact Steve immediately! Continue to next question.

  • Checked U-Joints to grease?

  • Next question.

  • Take photo.

  • Elaborate the problem. (play in U-Joints, metal shavings, makes noise, etc.)

  • Fix problem or call Steve.

  • Next question.

  • Checked fuel/water separator level?

  • Next question.

  • What is the water level in sight globe?

  • Continue to next question.

  • Is this the first time water has been this high?

  • Drain water. Continue to next question.

  • Call Steve immediately!

  • Call Steve immediately!

  • Checked sea strainer?

  • Next question.

  • Did you clean out the strainer and make sure the seal is in the lid and the bolts are tightened evenly to ensure a good seal?

  • Next question.

  • Do it!

  • Checked engine coolant level?

  • Continue to next question.

  • Take picture and notify Steve immediately!

  • Add media

  • Checked hydraulic fluid level?

  • Next question.

  • Take photo and contact STEVE immediately!

  • Is there hydraulic fluid visible in the bilge?

  • Take photo. Check all hydraulic hoses and fittings for leaks.

  • Did you find leak?

  • Fix leak and call STEVE.

  • Call STEVE.

  • With engine running and hydraulic clutch on, is there an oil slick visible behind the boat?

  • Take photo and contact STEVE immediately!

  • Call STEVE immediately!

  • Checked water hoses for leaks?

  • Next question.

  • Fix leak and call STEVE. Next question.

  • Are batteries strapped down?

  • Next question.

  • Strap batteries down. Continue to next question

  • Grease engine couplers?

  • Next question.

  • Call STEVE and explain to him why this hasn't been done. Continue to next question.

  • Checked belts for tightness and cracking?

  • Next question.

  • Elaborate the problem. (needs tightening, cracked, wore out, etc.)

  • Tighten, replace or call Steve.

  • Is tool kit on board?

  • Next question.

  • Put tool kit on board before leaving the dock. Continue to next question.

  • Did you wipe down the engine?

  • Next question.

  • Call Steve and explain to him why this hasn't been done. Continue to next question.

  • Did you wash the engine room?

  • Take photo. Continue to next question.

  • Call Steve and explain to him why this isn't done. Continue to next question.

  • Checked condition of parasail towline?

  • Next question.

  • Take photo. Elaborate problem (chaffed line, fraying, rope powder on winch etc.). Call Steve.

  • All harnesses inspected?

  • Next question.

  • Take photo. If one or more of the harnesses are not good.

  • Elaborate on the problem, (chaffed, ripped, bent clips, worn etc.). Call Steve.

  • Inspected parachutes and made sure the spare is on board?

  • All chutes are present and in good condition. Continue to next question.

  • Elaborate on problem. One or more chutes missing, tears, chaffing etc. Call Steve.

  • Inspected pulleys and rollers for towline?

  • Next question.

  • Take photo.

  • Please elaborate on problem. Roller sticks or won't roll, wearing, sharp edges etc. Call Steve.

  • Checked all gauges to ensure they are working properly?

  • Next question.

  • Elaborate on problem. Which gauge isn't working, corroded wire etc. Fix problem or call Steve. Continue to next question.

  • All safety equipment inspected? (Fire extinguishers, type 1 life vests, anchors etc.

  • Next question.

  • Take photo.

  • Elaborate on problem. Lost charge, missing, broken etc. Call Steve. Continue to next question.

  • Sign and submit - Captain:

  • Sign and submit - Deckhand:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.