Title Page

  • Equipment owner

  • Conducted on

  • Conducted by

  • Conducted at
  • Expiry date

Jumper Details

  • Has the jumper jumped at this DZ before?

  • Have any of their details or licences changed since they last had an equipment check?

  • Continue to Inspection page

  • Phone number

  • Email

  • APF Licence

  • APF membership expiry

  • Jumps in last 3 months

  • Jumps in last 6 months

  • Jumps in last 12 months

  • Tick thy crests!

  • Date of Birth

  • Phone number

  • Email address

  • Weight in kgs

  • APF membership number

  • APF licence

  • APF membership exipry

  • Jumps in the last 3 months

  • Jumps in the last 6 months

  • Jumps in the last 12 months

  • Explain thy crests.

  • DZ brief received and understood?

  • Cloud manual signed?

  • Club waiver signed?

  • Helmet suitable?

  • Camera mounts appropriate

  • Audible used?

  • Container type and serial number

  • Reserve due

  • Have the component parts been verified as compatible by at least a Packer A?

  • Is the gear Freefly friendly?

  • Why not?

  • Please give details

  • Next AAD service due or end of life?

  • Emergency handles secure

  • Harness - leg straps, chest strap, MLW

  • 3 rings correctly setup

  • RSL/MARD

  • Reserve loop condition and length

  • Reserve pilot chute not exposed?

  • Main pin flap secure?

  • Main closing loop tight and in good condition?

  • Pilot chute bridle not exposed?

  • BOC condition?

  • Jumps on main canopy?

  • Are the main and reserve sizes within the manufacturers recommended range?

  • UPT Vector https://uptvector.com/wp-content/uploads/2019/06/Sizing-Chart.pdf

  • Sunpath Javelin https://www.sunpath.com/designer/canopy-compatibility/

  • Mirage https://miragesys.com/support/container-sizing-guide/

  • Wings http://skydivewings.com/wp-content/uploads/2018/07/Wings-Container-Canopy-Sizing.pdf

  • Aerodyne Icon http://atools.flyaerodyne.com/iconsel.asp

  • Date signed off until

  • Please enter the expiry date of the gear check on the title page of this checklist.

  • Sport Jumper - I confirm that no parts or components have been altered or changed since the system was verified as compatible by at least a Packer A.

  • DZSO/Instructor signature - I confirm, as per a visual and tactile inspection, that the system's components are compatible.

  • Authority to conduct check?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.