REV A (02/20)
-
SAF HOLLAND CANADA
-
Conducted on:
-
Shift:
-
Inspector:
-
Assembler's Name:
-
Letter Code
-
Part No:
-
Casting Serial No:
-
Work order NO:
-
ECN Per Print:
Description
-
1.0 Burrs removed from bracket pin holes on 71 series and around holes for 104 locks.
-
2.0 Plunger is greased on all 4 sides and end of tail using black grease.
-
3.0 XA-1007 spring (Red) on tail of plunger.
-
4.0 Release handle and lever pivots on bushing with slight movement. Bolt must have nut jammed.
-
5.0 FW-128 spring in proper position.
-
6.0 Never-seez in lock and secondary lock pin holes.
-
7.0 Head of lock pin (primary and secondary) flush with casting and unchipped.
-
8.0 Adjust wedge, spring, bolt and lock nut in place. Minimum of 2 threads beyond lock nut on wedge bolt after adjustment is complete.
-
9.0 Threads deformed on adjusting wedge bolt.
-
10.0 Threads deformed on tail of 104 lock.
-
11.0 Lube fittings installed in lock pins.
-
12.0 Cotter pins and/or retaining rings installed on primary and secondary lock pins.
-
13.0 Secondary handle and arm installed with spring in place and cotter pins spread, arm swings freely.
-
14.0 Gap between 105 lock and plunger set at .040 min./.050 max. with locks closed around kingpin.
-
15.0 Grease zerks in place on 71 series wheels.
-
16.0 Grease hole open into pocket area on 71 series.
-
17.0 Assembler's stamp is clearly stamped.
-
18.0 Functional test o.k.
-
Accepted.
-
Comments.
