Information

  • Name:

  • Date/Time:

  • Facility:

  • 1.1 Employees lifting correctly with object weighing less than 50 lbs., employee using team lift technique if object is more than 50 lbs., or is awkward to lift.

  • 1.2 Employees exhibiting no forks of horseplay such as running, jumping, throwing objects, etc.

  • 1.3 Employees are loading and unloading machines without the use of excessive force.

  • 1.4 Employees who are servicing, repairing, or cleaning equipment and are in the point of operation have the equipment locked and tagged out.

Section 2 - Housekeeping

  • 2.1 Aisles are unobstructed and properly marked.

  • 2.2 Lighting is adequate for task work and workstations.

  • 2.3 Areas are clear of debris, hoses, cables, cords, and shavings. No water or fluid in walking/working surface.

  • 2.4 Aisles are clear of trip hazards. Hoses, cables, cords, pallets, work in progress, etc.

Section 3 - Personal Protective Equipment

  • 3.1 Safety glasses with sideshields worn properly. Welding helmet/lens and barrier screens used as needed. Safety glasses and shields worn while grinding.

  • 3.2 Proper gloves worn as indicated by the operation.

  • 3.3 Clothing is secure, not dangling. No loose jewelry.

  • 3.4 Hearing protection used during appropriate operations.

Section 4 - Machine Guarding

  • 4.1 Guards are in working condition. Works as designed.

  • 4.2 Physical guards securely fixed to equipment. Not easily removed.

  • 4.3 Machine controls guarded to prevent accidental activation. Warning signs posted as appropriate.

  • 4.4 Safety circuits and sensors function as designed, easily accessible, clearly identified, and properly marked. ( sensors, emergency stops, light curtains, door switches.)

Section 5 - Material Storage

  • 5.1 Material is stacked so it is stable.

  • 5.2 Storage racks are bolted to the floor, in good condition, and pedestrians are protected if working on the backside of a storage rack.

  • 5.3 Walkways, aisles, and restricted areas are clear of material storage.

  • 5.4 Material is being stored in the correct location.

Section 6 - Chemicals/Waste Management

  • 6.1 All containers are labeled to identify contents. (Proper manufacturer, HMIS, NFPA, or GHS label)

  • 6.2 Chemicals are stored in appropriate areas/cabinets when not in use. Corrosive material stored separately from flammable materials.

  • 6.3 MSDS or SDS are available for all chemicals.

  • 6.4 Waste separated and disposed of properly.

Section 7 - Fire Protection and Prevention

  • 7.1 Extinguishers marked/labeled, in place, hung on bracket, inspection tag indicating monthly and annual service date, signage present on wall/column, and pressure indicator in the green zone.

  • 7.2 Fire response equipment and electrical panels accessible (36" clearance in front.)

  • 7.3 Exits not obstructed either inside or outside, lighted exit signs visible, doors operate properly. Can you see a exit sign from where you are standing?

  • 7.4 Flammable material properly stored.

Section 8 - Powered Industrial Trucks

  • 8.1 Operator wearing seatbelt while operating PIT, belt in good condition, no knots and/or worn areas.

  • 8.2 Propane tank securely mounted, no leaks noticed.

  • 8.3 If unattended, forks lowered and parking brake set. Operable fire extinguisher, horn, back up alarm, and warning lights. No visible leaks or damage.

  • 8.4 Daily pre-shift checklist has been completed.

Section 9 - Electrical

  • 9.1 All electrical panels clear 36" to the front.

  • 9.2 Panels closed, covers over any empty slot.

  • 9.3 Absence of spliced /frayed cords. Ground prongs in place. Extension cords used only as temporary wiring.

  • 9.4 Cords are routed to prevent damage or are protected.

Section 10 - Walking/Working Surfaces

  • 10.1 Ladders are being properly used, warning and load labels visible, and no damage present.

  • 10.2 Stairs are well lit, in good repair, and covers are over any open slots.

  • 10.3 Floors are level, without holes, damage, water, oil, debris, or unnecessary material. Material shavings are picked up on properly disposed of in the required container.

  • 10.4 Platforms are clear of debris and have required safety railings.

Section 11 - Overhead Cranes and Rigging

  • 11.1 Overhead Cranes are properly marked with load rating and free of damage.

  • 11.2 Daily pre-shift checklists have been completed.

  • 11.3 All lifts have approved rigging load capacity for the load weight being lifted.

  • 11.4 All rigging is in good shape without damage, load capacity label visible, and unused rigging is returned to the proper location.

Section 12 - Other

  • Comments:

  • Add media

Signature

  • Auditor Name/Signature

  • Manager Name/Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.