Axxent - J1 ESLS Checklist

Is the existing ESLS sign functioning before works commence

Is the existing ESLS pole in good condition?

Is the existing ESLS solar panels in good condition?

Confirm the new ESLS sign has been installed to the correct location (Check Asset ID #)

Confirm the existing pole foundation is level & truely vertical

Confirm new solar panel is pointing north or best direction for available sunlight

Check for nearby vegetation likely to cause shading & clear if necessary

Confirm the ESLS pole is level & truely vertical

Confirm the existing ESLS sign poles restraint device is fitted 150mm from top of foundation sleeve to bottom of collar

Confirm the existing ESLS sign has a 10mm tear away hole is drilled 15mm above foundation collar

Ensure that 25mm trilob bolts are fitted with chain fixings only. Trilob bolts have been tightened to prevent pole from rotating

Confirm the existing ESLS sign has rubber pole sleeves installed as part of these works

Confirm the existing ESLS signs chain fastner is aligned to face oncoming traffic

Confirm existing ESLS sign has a " GREEN COLOURED SCHOOL ZONE" installed on the front of the sign

Confirm the existing ESLS sign has a "END OF SCHOOL ZONE" installed on the rear of the sign

Are the signs being commissioned today?

Confirm temporary corflute 40km static signs have been attached to the front of the new J1 sign.