Information
-
Course Title
-
Course Number
-
Customer
-
Operator Name
-
Start Date and Course Introduction
-
Location
Assessor/Instructor Competancy
-
The assessor/Instructor must be trained as per PUWER Regulation 9 Section 2.2 and have a full understanding of all plant vehicle operation that they are to assess.
-
Instructor Name
Operator Details
-
Date of Birth
-
Photo of operator
-
Health Operator is fit and in good health to be able to operate machinery at work including good vision with or without visual aid
-
undefined
- Yes
- No
-
If an operator has no proof of training held on record, they must not operate a forklift truck until proof of training Competancy has been proven?
-
Date of last test/Assessment or training course
-
Does the candidate have a certificate of training that has been passed or refreshed within the last three years?
-
Does the candidate have a certificate of training that has been passed or refreshed within the last three years?
-
If no training or assessment, how much experience has operator had.
-
Operated truck on a regular basis within the last 12 months
-
Declaration date of above details
-
Declaration of details above
Plant Vehicle
-
Type of plant equipment?
- Counterbalance
- Reach
- Pivot Steer
Truck information
-
Make/Model
-
Load capacity
-
Mast height
-
Load Centre
- 500mm
- 600mm
-
Attachments
Course Record
-
Course Introduction
-
Select date
-
HSAWA 1974
-
Select date
-
Safety Films
-
Select date
-
Intro to truck
-
Select date
-
Elementary Driving
-
Select date
-
Steering Exercises - Open Areas
-
Select date
-
Steering Exercises - Confined Areas
-
Lessons in picking up loads Depends on operator experience/needs
-
Racking System used
- Yes
- No
-
Select date
-
Demonstration of a Pre shift check by Instructor
-
Select date
-
Demonstration of Code of practice
-
undefined
- Yes
- No
-
Select date
-
Film - Stability
-
Select date
-
Practical Assessment
-
Select date
Daily Safety Inspection
-
The operator completes the Pre-shift inspection on the machine
-
Select date
-
The operator fully understands the capacity information plate?
-
The operator understands the correct fault reporting procedures?
-
If a fault has been found, the lift truck must be parked up in a safe place and the key removed. The fault must be made to a member of the management team.
Theory Questions
-
Operated truck operator passed the theory assessment
-
Photo of completed theory question sheet
-
Select date
Operator Assessment
-
Operated truck forward and in reverse, laden and unladen
-
Operated truck forward and in reverse, laden and unladen
-
Correct travel position of the forks/attachment when travelling unladen?
-
Executed 90 degree turns, left and right in a working aisle to suit the truck
-
Correct use of the horn when appropriate?
-
Bulk stacked and de-stacked loads
-
undefined
- Floor
- Eye level
- High level
-
Stacked and de-stacked in Pallet racking
-
undefined
- Floor
- Eye level
- High level
-
Operator had good all round safety observation?
-
Loaded/unloaded company/delivery vehicle with loads
-
The operator correctly parks the truck in a safe area and removes key
Assessment Recommendations & Evaluations
-
Assessors evaluation of operator safety?
- Excellent
- Good
- Satisfactory
- Re-training is advised
-
Comments
-
Course Pass with an evaluation of Excellent / Good / Satisfactory
Signatures
-
Date of assessment
-
Operator signature
-
Assessor signature