b3
-
Site conducted
-
Conducted on
-
Prepared by
-
Winch Identifcation
-
Photo of Equipment.
-
Conveyor Number
b3 win
-
The Belt Contractor is required to carry out the following Visual Inspection prior to using any winch.
-
1. Check wire rope is equal to or greater than the specification as marked on the data plate and is in good condition.
-
2. Check all leads and cables for cuts, broken wires and loose plugs etc.
-
3. Check pendent control cable and control pendent is in a legible casing in good <br>condition, buttons working and is in generally good condition.
-
4. Check drive motor is securely bolted and grade 8.8 bolts as a minimum are used.
-
5. Check guards are in place, secure and used.
-
6. Check all bolts on mounting frame are in place and secure.<br>
-
7. Visually check mounting frame for damage and cracks.<br>
-
8. Check brake and clutch are operating correctly.
-
9. Air/hydraulic winches checked for leaks.<br>
-
10. Air winches fitted with airline filters and lubricators and are maintained.<br>
-
11. Test run winch in both forward and reverse.
-
12. Winch securely anchored with rated chains or slings.<br>
-
Comment.
-
Signed
