IDENTIFICATION Belts

  • Site conducted

  • Conducted on

  • Prepared by

  • Crane identification

  • Kilometres

  • When is machines next service kilometres

  • Operational hours at beginning of shift

  • Pre-start photos

  • General cleanliness inside/outside.

NON-SLEW CRANE PRE-START

  • Level 1 - DO NOT OPERATE - Equipment must not be operated before fault is rectified.

  • All controls are functioning correctly

  • Wire Rope Lay (not crossed, condition ok)

  • Override Switch active only for pack up

  • Limit Switches/Anti-TwoBlock functional

  • Overload / Anti-Two Block Alarm functional

  • Radius Indicator functional

  • HOLD Brake functional

  • Boom Extends and Retracts correctly

  • Boom Raises and Lowers correctly

  • Winch brake holding

  • Water/Coolant levels correct

  • Emergency Steering operational

  • CraneSafe/Rego/Permits/Op Manual & Load Charts available

  • Seat and Seat Belt

  • Steering Function

  • Brake Function (Carrier)

  • Sheaves and Rollers

  • Load Indicator

  • Hook Block Assembly

  • Structural components

  • Lifting gear for use, including hands-free tools

  • Engine oil level

  • Brake Fluid leaks

  • Record tyre pressure Front left outside 1

  • Record tyre pressure Front left inside 2

  • Record tyre pressure Front Right inside 3

  • Record tyre pressure Front Right outside 4

  • Record tyre pressure Back Left outside 5

  • Record tyre pressure Back Left inside 6

  • Record tyre pressure Back Right inside 7

  • Record tyre pressure Back Right outside 8

  • Tyre Pressures and Conditions (Non-Slewing)

  • Level 2 - AUTHORISATION REQUIRED - Authorisation from Manager before operating this equipment

  • Lights and indicators are operational

  • Alternator charge light working

  • Horn functional

  • Inspect / Adjust Cameras and Mirrors

  • External Reverse Alarm functional

  • Windscreen in safe condition

  • Air Conditioning working

  • Orange Flashing Light operating

  • Loose Wheel Nut Indicators

  • Hydraulic Cylinder leaks

  • Level 3 - CORRECTIVE ACTION REQUIRED - Report fault to your Shift Supervisor

  • Hydraulic Oil level correct/leaks

  • Topped up Fuel level

  • Gauges functional

  • Guards in place

  • Steps / Hand holds

  • Access and Egress functional

  • Fire Extinguisher in date and functional

  • Grease System operational

  • Lubrication crane

  • Fuel Water drain

  • Batteries Connections

  • Air filter

  • V Belts

  • Air tank drain

  • Operator Signature

  • Comments: All defects and running repairs: *For any suspected major defects report to Department Superintendent immediately

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.