Title Page
-
Conducted on
-
Prepared by
-
Location
-
Office Name
-
Truck #
-
1. Change Engine Oil (Note: Increase frequency of engine oil change with severe working conditions or working hours.)
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
2. Replace Engine Oil Filter (Record Date on Filter)
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
3. Replace Fuel Filters
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
4. Replace/Clean Air Intake Filters
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
5. Replace Hydraulic Oil Filters
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
6. Inspect All Grease Fittings (Note: Some grease fittings may require servicing more frequently, depending on workload conditions, weather conditions and working environment conditions.)
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
7. Hoisting Mast Sheaves
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
8. All Hoist Shafts
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
9. Kelly Bar Bearing (Top)
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
10. 4-Rotary Box Bearings
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
11. Mast Tilt Hinge Pins
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
12. Tilt Cylinder Pivot Pins
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
13. Hydraulic Pump Drive Shaft U-Joint
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
14. Moyno Pump Packing Glands
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
15. Bean Pump Piston Rod and Packing Gland
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
16. Slide Base Cylinder Pivot Pin Sideway (wiggle tail) Cylinder Pivot Pin
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
17. PTO Bearing Block to Cathead
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
18. Auto Hammer Sprocket Shaft Bearings
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
19. Pivot Pin on Holding Clamps
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
20. Pivot Pin on Breakout Tool
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
21. Engine Clutch Leaver Bushing
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
-
22. PTO Shifter
-
Was vehicle placed back into service?
-
Why was vehicle placed back into service before maintenance or repair was completed?
Approvals
-
Maintenance Performed by
