BICSc Assessments

Title Page

Site conducted
Candidate Name
Course Start Date
Signature Of Assessor Agreeing with Assessments
Signature Of Candidate Agreeing With Assessments

MU1: Chemical Competence

Assessment Information

Assessment Start Date & Time
Assessment Finish Time
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code: MU1

🔺 1. Was hand hygiene carried out on commencement and were hand checked for cuts/abrasions and covered with a waterproof dressing?
🔺 2. We're warning signs used and sited correctly at the work area?
🔺 3. Did the candidate study the COSHH information for each chemical used, before proceeding with assessment?
🔺 4. Did the candidate confirm the location and content of of the relevant risk assessments/SSOW before proceeding with assessments?
🔺 5. Was the required personal protective equipment selected, checked and worn?
🔺 6. Was the area ventilated?
🔺 7. Was the correct colour coded equipment selected, checked and safely assembled?
🔺 8. Were the containers filled with the correct amount of water?
🔺 9. Were all the cleaning solutions prepared according to manufacturers instructions?
🔺 10. If a spray bottle was used, was it labelled correctly?
🔺 11. Were the containers wiped clean and tops secured after use?
🔺 12. Were all the prepared solutions disposed of correctly?
🔺 13. Was equipment, materials, and PPE checked, cleaned, dried, and stored correctly and th surrounding area left in a satisfactory condition?
🔺 14. Was the assessment completed safely without damage or risk to people, fixtures and fittings?
🔺 15. Were warning signs removed, checked and cleaned if necessary?
🔺 16. Was ventilation closed where appropriate?
🔺 17. Was hand hygiene carried out on competition of the assessment?

Results

Overall assessment score?
Minimum pass score of 17
Pass/Fail
Why was the assessment failed
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Retest Start Date & Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code: MU1

🔺 1. Was hand hygiene carried out on commencement and were hand checked for cuts/abrasions and covered with a waterproof dressing?
🔺 2. We're warning signs used and sited correctly at the work area?
🔺 3. Did the candidate study the COSHH information for each chemical used, before proceeding with assessment?
🔺 4. Did the candidate confirm the location and content of of the relevant risk assessments/SSOW before proceeding with assessments?
🔺 5. Was the required personal protective equipment selected, checked and worn?
🔺 6. Was the area ventilated?
🔺 7. Was the correct colour coded equipment selected, checked and safely assembled?
🔺 8. Were the containers filled with the correct amount of water?
🔺 9. Were all the cleaning solutions prepared according to manufacturers instructions?
🔺 10. If a spray bottle was used, was it labelled correctly?
🔺 11. Were the containers wiped clean and tops secured after use?
🔺 12. Were all the prepared solutions disposed of correctly?
🔺 13. Was equipment, materials, and PPE checked, cleaned, dried, and stored correctly and th surrounding area left in a satisfactory condition?
🔺 14. Was the assessment completed safely without damage or risk to people, fixtures and fittings?
🔺 15. Were warning signs removed, checked and cleaned if necessary?
🔺 16. Was ventilation closed where appropriate?
🔺 17. Was hand hygiene carried out on competition of the assessment?

Results

Overall assessment score?
Minimum pass score of 17
Pass/Fail
Why was the assessment failed
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

MU2: Safe Assembly Of Equipment

Assessment Information

Assessment Start Date & Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code: MU2

🔺 1. Was hand hygiene carried out on commencement and were hands checked for cuts/abrasions and covered with a waterproof plaster?
🔺 2. Were warning signs used and sited correctly at the work area?
🔺 3. Did the candidate confirm the location &a content of the risk assessment before proceeding with assessment?
🔺 4. Was the required PPE selected, checked & worn?
🔺 5. Did the candidate study the manufactures operating & maintenance instructions & check the equipment and attachments accordingly?
🔺 6. Did the candidate check that a portable appliance test is current?
🔺 7. Did the candidate explain the company procedure for dealing with faulty equipment?
🔺 8. Did the candidate check the electrical socket for signs of damage before use?
🔺 9. Did the candidate check the electrical socket was turned off before plugging in?
🔺 10. Was all equipment checked with due regard to safety?
🔺 11. Did the candidate switch the electrical socket socket off before removing the plug?
🔺 12. Did the candidate explain the correct process for cleaning and storing the equipment afterward use?
🔺 13. Were any materials & PPE used checked, cleaned, dried and stored correctly or disposed of & the surrounding area left in a satisfactory condition?
🔺 14. Was the assessment completed safety without damage or risk to people, fixtures & fittings?
🔺 15. Were warning signs removed, checked & cleaned?
🔺 16. Was hand hygiene carried out on completion of the assessment?

Result

Overall assessment score?
Minimum pass score of 16.
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Rretest Start Date & Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code: MU2

🔺 1. Was hand hygiene carried out on commencement and were hands checked for cuts/abrasions and covered with a waterproof plaster?
🔺 2. Were warning signs used and sited correctly at the work area?
🔺 3. Did the candidate confirm the location &a content of the risk assessment before proceeding with assessment?
🔺 4. Was the required PPE selected, checked & worn?
🔺 5. Did the candidate study the manufactures operating & maintenance instructions & check the equipment and attachments accordingly?
🔺 6. Did the candidate check that a portable appliance test is current?
🔺 7. Did the candidate explain the company procedure for dealing with faulty equipment?
🔺 8. Did the candidate check the electrical socket for signs of damage before use?
🔺 9. Did the candidate check the electrical socket was turned off before plugging in?
🔺 10. Was all equipment checked with due regard to safety?
🔺 11. Did the candidate switch the electrical socket socket off before removing the plug?
🔺 12. Did the candidate explain the correct process for cleaning and storing the equipment afterward use?
🔺 13. Were any materials & PPE used checked, cleaned, dried and stored correctly or disposed of & the surrounding area left in a satisfactory condition?
🔺 14. Was the assessment completed safety without damage or risk to people, fixtures & fittings?
🔺 15. Were warning signs removed, checked & cleaned?
🔺 16. Was hand hygiene carried out on completion of the assessment?

Result

Overall assessment score?
Minimum pass score of 16.
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

MU3: Storage Of Equipment & Materials

Assessment Information

Assessment Start Date & Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour
What are the issues to spot
- Chemical In Sink
- Cloth In Sink
- Chemical Stores the wrong way round
- Mouse
- Colour coding issues
- Chemical with top off
- heavy object on high shelf
- Rubbish on the floor
- Vacuum by sink
- Used mop hanging up
- Out of date chemical

Skill Code MU3

🔺 1. Was hand hygiene carried out on commencement and were hands checked for cuts/abrasions and covered with a waterproof dressing?
🔺 2. Were warning signs used and sited correctly at the work area?
🔺 3. Did the candidate confirm the location and content of the relevant risk assessment before proceeding with assessment?
🔺 4. Was the area ventilated?
🔺 5. Was the required PPE selected, checked & worn?
🔺 6. Was the poor and surrendering area cleared of debris & spillage?
🔺 7. Was waste removed (as appropriate)?
🔺 8. Did the candidate check shelving / racking was fitted securely, undamaged, clean, not overloaded or stacked incorrectly?
🔺 9. Were heavy items stored at an appropriate level?
🔺 10. Did the candidate check that all chemical bottles were labelled correctly & facing outwards?
🔺 11. Did the candidate check that all cleaning agents were stored correctly with regards to type and to avoid interaction?
🔺 12. Did the candidate check that all cleaning agents were stored correctly in accordance with stock rotation & expiry date?
🔺 13. Were equipment & materials cleaned & stored correctly to allow for air-drying or laundered?
🔺 14. Was all equipment stored correctly & safely with due regard to entrance & exit?
🔺 15. Was assessment completed safely without damage or to people, fixtures & fittings?
🔺 16. Did the candidate check for signs of damage or pest infestation & explain the company reporting procedure?
🔺 17. Were warning signs removed, checked & cleaned if necessary?
🔺 18. Was ventilation closed?
🔺 19. Was the storage area left In a clean & secure condition?
🔺 20. Was hand hygiene carried out on completion of the assessment?

Result

Overall assessment score?
Minimum pass score of 20
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Retest Start Date & Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code MU3

🔺 1. Was hand hygiene carried out on commencement and were hands checked for cuts/abrasions and covered with a waterproof dressing?
🔺 2. Were warning signs used and sited correctly at the work area?
🔺 3. Did the candidate confirm the location and content of the relevant risk assessment before proceeding with assessment?
🔺 4. Was the area ventilated?
🔺 5. Was the required PPE selected, checked & worn?
🔺 6. Was the poor and surrendering area cleared of debris & spillage?
🔺 7. Was waste removed (as appropriate)?
🔺 8. Did the candidate check shelving / racking was fitted securely, undamaged, clean, not overloaded or stacked incorrectly?
🔺 9. Were heavy items stored at an appropriate level?
🔺 10. Did the candidate check that all chemical bottles were labelled correctly & facing outwards?
🔺 11. Did the candidate check that all cleaning agents were stored correctly with regards to type and to avoid interaction?
🔺 12. Did the candidate check that all cleaning agents were stored correctly in accordance with stock rotation & expiry date?
🔺 13. Were equipment & materials cleaned & stored correctly to allow for air-drying or laundered?
🔺 14. Was all equipment stored correctly & safely with due regard to entrance & exit?
🔺 15. Was assessment completed safely without damage or to people, fixtures & fittings?
🔺 16. Did the candidate check for signs of damage or pest infestation & explain the company reporting procedure?
🔺 17. Were warning signs removed, checked & cleaned if necessary?
🔺 18. Was ventilation closed?
🔺 19. Was the storage area left In a clean & secure condition?
🔺 20. Was hand hygiene carried out on completion of the assessment?

Result

Overall assessment score?
Minimum pass score of 20
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

BU1: Dust Control Mop Sweeping

Assessment Information

Assessment Start Date & Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU1

🔺 1. Was hand hygiene carried out on commencement & were hands checked for cuts/abrasions & covered with a waterproof dressing?
🔺 2. Were warning signs used & sited correctly at each work area?
🔺 3. Did the candidate confirm the location & content of the relevant risk assessment before proceeding with the skill?
🔺 4. Was the required PPE selected, checked & worn?
🔺 5. Was the correct equipment & materials selected, checked & safely assembled?
6. Was the floor checked for large items of debris & adhesive soiling & removed appropriately?
7. Was an area of the floor adjacent to the skirting board swept by cutting in parallel to skirting boards?
8. Was sweeping carried out systematically using a continuous stroke with overlapping passes so that all areas were effectively & efficient cleaned?
🔺 9. Was the mop sweeper held correctly & the area being cleaned at any one time of a manageable size, so that the candidate was in full control & not over reaching?
🔺 10. Was the mop sweep head kept in contact with the floor at all times to avoid dust showers & a leading edge maintained?
11. Was the mop sweep head cleaned or changed to remove soil once it became saturated?
12. Was mop sweep head cleaned, removed or disposed of on completion of the skill?
13. Was loose soil removed & the appearance of the floor & surrounding area satisfactory after completion of the skill?
🔺 14. Did the candidate check for signs of damage or pest infestation & explain the company reporting procedure?
🔺 15. Was equipment, materials & PPE heckled, cleaned, dried & stored correctly and the surrounding area left in a satisfactory condition?
🔺 16. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 17. Were warning signs removed, checked & cleaned?
🔺 18. Was hand hygiene carried out on completion of the assessment?

Results

Overall assessment score?
Minimum pass score of 16
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Retest Start Date & Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU1

🔺 1. Was hand hygiene carried out on commencement & were hands checked for cuts/abrasions & covered with a waterproof dressing?
🔺 2. Were warning signs used & sited correctly at each work area?
🔺 3. Did the candidate confirm the location & content of the relevant risk assessment before proceeding with the skill?
🔺 4. Was the required PPE selected, checked & worn?
🔺 5. Was the correct equipment & materials selected, checked & safely assembled?
6. Was the floor checked for large items of debris & adhesive soiling & removed appropriately?
7. Was an area of the floor adjacent to the skirting board swept by cutting in parallel to skirting boards?
8. Was sweeping carried out systematically using a continuous stroke with overlapping passes so that all areas were effectively & efficient cleaned?
🔺 9. Was the mop sweeper held correctly & the area being cleaned at any one time of a manageable size, so that the candidate was in full control & not over reaching?
🔺 10. Was the mop sweep head kept in contact with the floor at all times to avoid dust showers & a leading edge maintained?
11. Was the mop sweep head cleaned or changed to remove soil once it became saturated?
12. Was mop sweep head cleaned, removed or disposed of on completion of the skill?
13. Was loose soil removed & the appearance of the floor & surrounding area satisfactory after completion of the skill?
🔺 14. Did the candidate check for signs of damage or pest infestation & explain the company reporting procedure?
🔺 15. Was equipment, materials & PPE heckled, cleaned, dried & stored correctly and the surrounding area left in a satisfactory condition?
🔺 16. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 17. Were warning signs removed, checked & cleaned?
🔺 18. Was hand hygiene carried out on completion of the assessment?

Results

Overall assessment score?
Minimum pass score of 16
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

BU2: Damp Mopping

Assessment Information

Assessment Start Date & Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU2

🔺 1. Was hand hygiene carried out on commencement and were hands checked for cuts/abrasions covered with a waterproof dressing?
🔺 2. Were warning signs used & sited correctly at each work area?
🔺 3. Did the candidate study the COSHH information before proceeding with skill?
🔺 4. Did the candidate confirm the location & content of the relevant risk assessment?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?
🔺 9. Did the candidate stand to the front of the bucket & apply firm downward pressure while holding the bucket between their feet?
10. Was the area of floor adjacent to skirting boards cleaned by cutting in parallel to skirting boards?
11. Was a non abrasive pad used as required?
12. Was mopping carried out using systematic overlapping passes so that all areas were effectively & efficiently cleaned?
🔺 13. Was the mop help correctly & the area being cleaned at any one time of a manageable size, so the candidate was in full control & not over reaching?
14. Was the correct amount of water applied to the floor?
15. Was the mop rinsed out frequently?
16. Was the mop head & cleaning solution changed if needed?
🔺 17. Was the bucket always positioned behind the line of work?
🔺 18. Was the floor left as dry as possible?
19. Was the appearance of the floor and surrounding area satisfactory after completion of the skill?
🔺 20. Were mop heads thoroughly rinsed and sent to laundry?
🔺 21. Did the candidate check for signs of pests or damage and explain the reporting procedure?
🔺 22. Was everything checked, cleaned, dried and stored correctly and the surrounding area left in a satisfactory condition?
🔺 23. Was the skill completed safely without damage or risk to people, fixtures and fittings?
🔺 24. Were warning signs removed, checked and cleaned if necessary?
🔺 25. Was ventilation closed where appropriate?
🔺 26. Was hand hygiene carried out on completion of the skill?

Results

Overall assessment score?
Minimum pass is 23
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree
Candidate tick to agree

Assessment Information

Retest Start Date & Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU2

🔺 1. Was hand hygiene carried out on commencement and were hands checked for cuts/abrasions covered with a waterproof dressing?
🔺 2. Were warning signs used & sited correctly at each work area?
🔺 3. Did the candidate study the COSHH information before proceeding with skill?
🔺 4. Did the candidate confirm the location & content of the relevant risk assessment?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?
🔺 9. Did the candidate stand to the front of the bucket & apply firm downward pressure while holding the bucket between their feet?
10. Was the area of floor adjacent to skirting boards cleaned by cutting in parallel to skirting boards?
11. Was a non abrasive pad used as required?
12. Was mopping carried out using systematic overlapping passes so that all areas were effectively & efficiently cleaned?
🔺 13. Was the mop help correctly & the area being cleaned at any one time of a manageable size, so the candidate was in full control & not over reaching?
14. Was the correct amount of water applied to the floor?
15. Was the mop rinsed out frequently?
16. Was the mop head & cleaning solution changed if needed?
🔺 17. Was the bucket always positioned behind the line of work?
🔺 18. Was the floor left as dry as possible?
19. Was the appearance of the floor and surrounding area satisfactory after completion of the skill?
🔺 20. Were mop heads thoroughly rinsed and sent to laundry?
🔺 21. Did the candidate check for signs of pests or damage and explain the reporting procedure?
🔺 22. Was everything checked, cleaned, dried and stored correctly and the surrounding area left in a satisfactory condition?
🔺 23. Was the skill completed safely without damage or risk to people, fixtures and fittings?
🔺 24. Were warning signs removed, checked and cleaned if necessary?
🔺 25. Was ventilation closed where appropriate?
🔺 26. Was hand hygiene carried out on completion of the skill?

Results

Overall assessment score?
Minimum pass is 23
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree
Candidate tick to agree

BU3: Suction Cleaning

Assessment Information

Assessment Start Date & Time.
Assessment Finish Time
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU3

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate confirm the location and content of the relevant risk assessments/SSOW?
🔺 4. Were the required PPE selected, checked and worn?
🔺 5. Was the correct equipment & materials selected, checked and safely assembled?
6. Were large items of rubbish cleared suction cleaning commenced?
🔺 7. Was a circuit breaker used?
8. Was attention given to edges and corners using the appropriate attachments?
9. Was the height of the head adjusted to suit the surface being cleaned?
10. Was suction cleaning carried out with regards to differences in requirements of different parts of floor? (e.g traffic lanes)
🔺 11. Was the cable positioned behind the line of work?
🔺 12. Was the plug safely removed from the power socket and was the cable recoiled correctly
13. Was the skill carried out systematically so that all areas were effectively and efficiently cleaned?
14. Was the apperance of the floor and surrounding area completed satisfactory?
🔺 15. Did the candidate check for signs of damage and pests and report?
🔺 16. Was equipment, materials, and PPE checked, cleaned, dried, and stored correctly and th surrounding area left in a satisfactory condition?
🔺 17. Was the skill completed safely without damage or risk to people, fixture & fittings?
🔺 18. Were warning signs removed, checked & cleaned?
🔺 19. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score is 17
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree

Assessment Information

Retest Start Sate & Time
Retest Finish TIme
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU3

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate confirm the location and content of the relevant risk assessments/SSOW?
🔺 4. Were the required PPE selected, checked and worn?
🔺 5. Was the correct equipment & materials selected, checked and safely assembled?
6. Were large items of rubbish cleared suction cleaning commenced?
🔺 7. Was a circuit breaker used?
8. Was attention given to edges and corners using the appropriate attachments?
9. Was the height of the head adjusted to suit the surface being cleaned?
10. Was suction cleaning carried out with regards to differences in requirements of different parts of floor? (e.g traffic lanes)
🔺 11. Was the cable positioned behind the line of work?
🔺 12. Was the plug safely removed from the power socket and was the cable recoiled correctly
13. Was the skill carried out systematically so that all areas were effectively and efficiently cleaned?
14. Was the apperance of the floor and surrounding area completed satisfactory?
🔺 15. Did the candidate check for signs of damage and pests and report?
🔺 16. Was equipment, materials, and PPE checked, cleaned, dried, and stored correctly and th surrounding area left in a satisfactory condition?
🔺 17. Was the skill completed safely without damage or risk to people, fixture & fittings?
🔺 18. Were warning signs removed, checked & cleaned?
🔺 19. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score is 17
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree

BU5: Emptying & Cleaning Of General Waste Bins

Assessment Information

Assessment Start Date & Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU5

🔺 1. Was hand hygiene carried out?
🔺 2. were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information before starting?
🔺 4. Did the candidate confirm the location and contents of the risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. was the required PPE selected, checked and worn?
🔺 7. Was the correct equipment selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared according to manufacturers instructions?
🔺 9. Did the candidate visually check for signs of sharp items in the bin?
🔺 10. Was all the waste safely removed from the bin?
11. Was the bin thoroughly washed and left to dry?
12. Was a non abrasive pad used if required?
13. Was a clean bin liner inserted appropriately?
14. Was loose waste removed from the surrounding area?
15. Was the waste removed to an appropriate collection point?
🔺 16. Did the candidate check for signs of damage or pests & report?
17. Was the appearance of the bin and surrounding area satisfactory?
🔺 18. Was equipment, materials and PPE checked, cleaned, dried & stored correctly?
🔺 19. Was the assessment completed safely without damage or risk to people, fixtures & fittings?
🔺 20. were warning signs removed, checked & cleaned?
🔺 21. Was ventilation closed?
🔺 22. Was hand hygiene carried out?

Results

Overall Assessment Score
Minimum Pass Mark is 20
Pass/Fail
Why was the assessment a fail?
Additional Comments
Assessor tick to agree.
Candidate tick to agree

Assessment Information

Retest Date & Start Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU5

🔺 1. Was hand hygiene carried out?
🔺 2. were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information before starting?
🔺 4. Did the candidate confirm the location and contents of the risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. was the required PPE selected, checked and worn?
🔺 7. Was the correct equipment selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared according to manufacturers instructions?
🔺 9. Did the candidate visually check for signs of sharp items in the bin?
🔺 10. Was all the waste safely removed from the bin?
11. Was the bin thoroughly washed and left to dry?
12. Was a non abrasive pad used if required?
13. Was a clean bin liner inserted appropriately?
14. Was loose waste removed from the surrounding area?
15. Was the waste removed to an appropriate collection point?
🔺 16. Did the candidate check for signs of damage or pests & report?
17. Was the appearance of the bin and surrounding area satisfactory?
🔺 18. Was equipment, materials and PPE checked, cleaned, dried & stored correctly?
🔺 19. Was the assessment completed safely without damage or risk to people, fixtures & fittings?
🔺 20. were warning signs removed, checked & cleaned?
🔺 21. Was ventilation closed?
🔺 22. Was hand hygiene carried out?

Results

Overall Assessment Score
Minimum Pass Mark is 20
Pass/Fail
Why was the assessment a fail?
Additional Comments
Assessor tick to agree.
Candidate tick to agree

BU6: Dusting & Damp Wiping Of Surfaces

Assessment Information

Assessment Date & Start Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU6

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location of the risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked and worn?
🔺 7. Was the correct equipment selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?

Dusting

9. Were vertical surfaces dusted working from top to bottom?
🔺 10. Did the candidates feet remain flat on the floor, standing at an angle to the vertical surface being dusted?
11. Was dust drawn out from of the corners & away from the edges of horizontal surfaces?
12. Was the duster folded so all clean sides were used & replaced when necessary?
🔺 13. Was dusting carried out in controlled manner without the creation of dust showers?

Damp Wiping

14. Did the candidate apply the cleaning solution directly to the cloth?
Were the cloths refolded so all clean sides were used?
16. Was a non-abrasive pad used as required?
17. Was the cloth and cleaning solution changes when needed?
18. Were surfaces dry buffed?
🔺 19. Did the candidate clean a manageable area at any one time to avoid over reaching?
20. Were the skills carried out systematically using straight overlapping passes so that all surfaces were effectively and efficiently cleaned?
21. Was the appearance of the surfaces and surrounding area satisfactory?
🔺 22. Did the candidate check for signs of damage and pests and reported?
🔺 23. Was all equipment checked, cleaned dried & stored correctly & surrounding area left in a satisfactory condition?
🔺 24. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 25. Were warning signs removed, checked and cleaned?
🔺 26. Was ventilation closed?
🔺 27. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score of 24
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Retest Date & Start Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU6

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location of the risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked and worn?
🔺 7. Was the correct equipment selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?

Dusting

9. Were vertical surfaces dusted working from top to bottom?
🔺 10. Did the candidates feet remain flat on the floor, standing at an angle to the vertical surface being dusted?
11. Was dust drawn out from of the corners & away from the edges of horizontal surfaces?
12. Was the duster folded so all clean sides were used & replaced when necessary?
🔺 13. Was dusting carried out in controlled manner without the creation of dust showers?

Damp Wiping

14. Did the candidate apply the cleaning solution directly to the cloth?
Were the cloths refolded so all clean sides were used?
16. Was a non-abrasive pad used as required?
17. Was the cloth and cleaning solution changes when needed?
18. Were surfaces dry buffed?
🔺 19. Did the candidate clean a manageable area at any one time to avoid over reaching?
20. Were the skills carried out systematically using straight overlapping passes so that all surfaces were effectively and efficiently cleaned?
21. Was the appearance of the surfaces and surrounding area satisfactory?
🔺 22. Did the candidate check for signs of damage and pests and reported?
🔺 23. Was all equipment checked, cleaned dried & stored correctly & surrounding area left in a satisfactory condition?
🔺 24. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 25. Were warning signs removed, checked and cleaned?
🔺 26. Was ventilation closed?
🔺 27. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score of 24
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

BU9: Auto Scrubber Drying

Assessment Information

Assessment Date & Start Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU9

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used & sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & content of the relevant risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?
9. Did the candidate select the appropriate brush or pad?
🔺 10. Was the solution tank filled correctly?
🔺 11. Did the candidate insert the circuit breaker into the power socket before plugging in the machine?
12. Was the speed of the machine considered in relation to the floor soiling?
13. Was the solution application controlled & dispensed relevant to the amount/type of floor?
🔺 14. Was the machine under control at all time?
🔺 15. Was the cable always positioned behind the line of work?
16. Was the collection tank checked at regular intervals & emptied when needed?
17. Was the condition of the brush/pad, squeegee blade checked, cleaned or turned?
18. Was the skill carried out systematically so all areas were effectively & efficiently cleaned?
🔺 19. Was the plug safely removed from the socket & was the cable recoiled correctly?
20. Did the candidate connect the machine to the charging unit on completion & in a suitable location?
21. Was the appearance of the floor & surrounding area satisfactory?
🔺 22. Did the candidate check for signs of damage/pests & report?
🔺 23. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 24. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 25. Were warning signs removed, checked & cleaned?
🔺 26. Was ventilation closed?
🔺 27. Was hand hygiene carried out?

Result

Overall Assessment Score?
Minimum pass score of 24
Pass/Fail
Why was the assessment failed?
Additional Information
Assessor tick to agree.
Candidate tick to agree

Assessment Information

Retest Date & Start Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU9

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used & sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & content of the relevant risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?
9. Did the candidate select the appropriate brush or pad?
🔺 10. Was the solution tank filled correctly?
🔺 11. Did the candidate insert the circuit breaker into the power socket before plugging in the machine?
12. Was the speed of the machine considered in relation to the floor soiling?
13. Was the solution application controlled & dispensed relevant to the amount/type of floor?
🔺 14. Was the machine under control at all time?
🔺 15. Was the cable always positioned behind the line of work?
16. Was the collection tank checked at regular intervals & emptied when needed?
17. Was the condition of the brush/pad, squeegee blade checked, cleaned or turned?
18. Was the skill carried out systematically so all areas were effectively & efficiently cleaned?
🔺 19. Was the plug safely removed from the socket & was the cable recoiled correctly?
20. Did the candidate connect the machine to the charging unit on completion & in a suitable location?
21. Was the appearance of the floor & surrounding area satisfactory?
🔺 22. Did the candidate check for signs of damage/pests & report?
🔺 23. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 24. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 25. Were warning signs removed, checked & cleaned?
🔺 26. Was ventilation closed?
🔺 27. Was hand hygiene carried out?

Result

Overall Assessment Score?
Minimum pass score of 24
Pass/Fail
Why was the assessment failed?
Additional Information
Assessor tick to agree.
Candidate tick to agree

BU10: Glass Cleaning

Assessment Information

Assessment Date & Start Time
Assessment Finish Time
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU10

🔺 1. Was had hygiene carried out?
🔺 2. Were warning signs used and sited correctly at each work site?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & content of the relevant risk assessment/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the cleaning equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution/micro-fibre prepared correctly?
9. Was cleaning solution given sufficient contact time?
10. Did the candidate apply the cleaning solution correctly with a damp cloth or if using a spray bottle was the solution applied directly to the cloth?
11. Were cloths rinsed out, recharged, wrung out & refolded, or if using a spray bottle was the cloth folded so all clean sides were used?
12. Was the cloth and cleaning solution changed?
13. Were surfaces dry buffed leaving the glass free from smears & water marks?
14. Was the skill carried out systematically so that all surfaces were effectively & efficiently cleaned?
🔺 15. Did the candidate checked for signs of damage/pests and report?
🔺 16. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 17. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 18. Were warning signs removed, checked & cleaned?
🔺 19. Was ventilation closed?
🔺 20. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score is 18.
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
candidate tick to agree.

Assessment Information

Assessment Date & Start Time
Assessment Finish Time
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU10

🔺 1. Was had hygiene carried out?
🔺 2. Were warning signs used and sited correctly at each work site?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & content of the relevant risk assessment/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the cleaning equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution/micro-fibre prepared correctly?
9. Was cleaning solution given sufficient contact time?
10. Did the candidate apply the cleaning solution correctly with a damp cloth or if using a spray bottle was the solution applied directly to the cloth?
11. Were cloths rinsed out, recharged, wrung out & refolded, or if using a spray bottle was the cloth folded so all clean sides were used?
12. Was the cloth and cleaning solution changed?
13. Were surfaces dry buffed leaving the glass free from smears & water marks?
14. Was the skill carried out systematically so that all surfaces were effectively & efficiently cleaned?
🔺 15. Did the candidate checked for signs of damage/pests and report?
🔺 16. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 17. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 18. Were warning signs removed, checked & cleaned?
🔺 19. Was ventilation closed?
🔺 20. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score is 18.
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
candidate tick to agree.

BU12: Cleaning Toilet Facilities

Assessment Infotrmation

Assessment Date & Start Time
Assessment Finish Time
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU12

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & relevant risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?
🔺 9. Were waste water outlets cleared of debris?

Hand Wash Basins

🔺 10. Did the candidate clean the surrounding vertical surfaces, fittings, pipes dispensers & ledges in the correct sequence?
11. Was the cleaning solution applied to the basin and given sufficient contact time?
🔺 12. Did the candidate clean all of the surfaces of the basin working from the outside in?
🔺 13. Did the candidate pay particular attention to cleaning the taps, overflow, plug & plug hole?
15. Was the basin and surfaces rinsed thoroughly & wiped dry to remove and excess moisture?

Toilet Bowls

15. Was the toilet flushed & water pushed back?
16. Was the cleaning solution applied to the toilet bowl &attention paid to under the rim & water inlet, agitated with the brush & given sufficient contact time?
🔺 17. Did the candidate clean the surrounding vertical surfaces, fittings, support rails, dispensers & edges in the correct order?
18. Did the candidate clean the outer surfaces of the toilet bowl including pipework, cistern, seat/lid hinges?
19. Did the candidate scrub the toilet bowl paying particular attention to any stains, water lines & under the rim before flushing?
🔺 20. Was the toilet brush rinsed in the flushing water & brush holder cleaned?
21. Was the toilet bowl outer rim, seat & lid dried to remove excess moisture?
22. Did the candidate close the lid & wipe the flush handle?

Urinals

23. Was the urinal flushed prior to applying the cleaning agent?
24. Was cleaning solution applied to the urinal bowl, agitated & given enough contact time?
🔺 25. Did the candidate clean the surrounding vertical surfaces &edges in the correct order?
26. Did the candidate clean the outer surfaces of the urinal bowl including pipework?
27. Was the urinal flushed or rinsed thoroughly & dried to remove excess moisture?

Continue

28. Were waste bins emptied & cleaned?
29. Were mirrors & doors cleaned & consumables replenished?
30. Was attention given to underneath of dispensers?
31. Was a non-abrasive pad used?
🔺 32. Was the cloth recharged, re-folded or changed/disposed of?
🔺 33. Was the skill carried out systematically & in the correct sequence?
🔺 34. Did the candidate check for signs of damage/pests & report?
35. Was the appearance of the surfaces & surrounding area satisfactory?
🔺 36. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 37. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 38. Were warning signs removed, checked & cleaned?
🔺 39. Was ventilation closed?
🔺 40. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score of 31
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Infotrmation

Retest Date & Start Time
Retest Start Time
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU12

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & relevant risk assessments/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution prepared correctly?
🔺 9. Were waste water outlets cleared of debris?

Hand Wash Basins

🔺 10. Did the candidate clean the surrounding vertical surfaces, fittings, pipes dispensers & ledges in the correct sequence?
11. Was the cleaning solution applied to the basin and given sufficient contact time?
🔺 12. Did the candidate clean all of the surfaces of the basin working from the outside in?
🔺 13. Did the candidate pay particular attention to cleaning the taps, overflow, plug & plug hole?
15. Was the basin and surfaces rinsed thoroughly & wiped dry to remove and excess moisture?

Toilet Bowls

15. Was the toilet flushed & water pushed back?
16. Was the cleaning solution applied to the toilet bowl &attention paid to under the rim & water inlet, agitated with the brush & given sufficient contact time?
🔺 17. Did the candidate clean the surrounding vertical surfaces, fittings, support rails, dispensers & edges in the correct order?
18. Did the candidate clean the outer surfaces of the toilet bowl including pipework, cistern, seat/lid hinges?
19. Did the candidate scrub the toilet bowl paying particular attention to any stains, water lines & under the rim before flushing?
🔺 20. Was the toilet brush rinsed in the flushing water & brush holder cleaned?
21. Was the toilet bowl outer rim, seat & lid dried to remove excess moisture?
22. Did the candidate close the lid & wipe the flush handle?

Urinals

23. Was the urinal flushed prior to applying the cleaning agent?
24. Was cleaning solution applied to the urinal bowl, agitated & given enough contact time?
🔺 25. Did the candidate clean the surrounding vertical surfaces &edges in the correct order?
26. Did the candidate clean the outer surfaces of the urinal bowl including pipework?
27. Was the urinal flushed or rinsed thoroughly & dried to remove excess moisture?

Continue

28. Were waste bins emptied & cleaned?
29. Were mirrors & doors cleaned & consumables replenished?
30. Was attention given to underneath of dispensers?
31. Was a non-abrasive pad used?
🔺 32. Was the cloth recharged, re-folded or changed/disposed of?
🔺 33. Was the skill carried out systematically & in the correct sequence?
🔺 34. Did the candidate check for signs of damage/pests & report?
35. Was the appearance of the surfaces & surrounding area satisfactory?
🔺 36. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 37. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 38. Were warning signs removed, checked & cleaned?
🔺 39. Was ventilation closed?
🔺 40. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score of 31
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

BU13: Cleaning Washroom Facilities

Assessment Information

Assessment Date & Start Time
Assessment Finish Time
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU13

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location and content of the relevant risk assessment/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution/mirco-fibre prepared correctly?
🔺 9. Were waste water outlets cleared of debris?

Shower

10. Was cleaning solution applied to the shower area & walls & given sufficient contact time?
🔺 11. Did the candidate pay particular attention to cleaning the shower heads, shower controls, hose, support rails, pipes, soap try & plug hole?
12. Was the shower tray & rail/screen cleaned?
13. Was the shower appliance & surfaces rinsed thoroughly & wiped dry?
🔺 14. Was the slip mat cleaned on both sides and left to dry?
🔺 15. Did the candidate clean the surrounding outer & underneath surfaces of the bath, walls, fittings, pipes, dispensers & ledges in the correct sequence?

Bath

16. Was cleaning solution applied to the bath & given sufficient contact time?
🔺 17. Did the candidate pay particular attention to cleaning the taps, overflow, plug & plug hole?
🔺 18. Did the candidate clean all surfaces of the bath working from the outside in?
19. Was the bath & surfaces rinsed thoroughly & wiped dry?
🔺 20.Was the slip mat cleaned on both sides & left to air dry?

Continue

21.Were waste bins emptied & cleaned?
22. Were mirrors & doors cleaned & consumables replenished?
23. Was attention given to the underneath of dispensers removing any soiling or build up?
24. Was a non-abrasive pad used?
🔺 25. Was the cloth recharged, re-folded or changed when needed?
🔺 26. Was the skill carried out systematically & in the correct order?
🔺 27. Did the candidate check for signs of damage/pests & report?
28. Was the appearance of the surfaces & surrounding area satisfactory?
🔺 29. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 30. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 31. Were warning signs removed, checked & cleaned?
🔺 32. Was ventilation closed?
🔺 33. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score of 24
Pass/Fail
Why was the assessment failed?
Additional Comments?
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Retest Date & Start Time
Retest Finish Time
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code BU13

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location and content of the relevant risk assessment/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution/mirco-fibre prepared correctly?
🔺 9. Were waste water outlets cleared of debris?

Shower

10. Was cleaning solution applied to the shower area & walls & given sufficient contact time?
🔺 11. Did the candidate pay particular attention to cleaning the shower heads, shower controls, hose, support rails, pipes, soap try & plug hole?
12. Was the shower tray & rail/screen cleaned?
13. Was the shower appliance & surfaces rinsed thoroughly & wiped dry?
🔺 14. Was the slip mat cleaned on both sides and left to dry?
🔺 15. Did the candidate clean the surrounding outer & underneath surfaces of the bath, walls, fittings, pipes, dispensers & ledges in the correct sequence?

Bath

16. Was cleaning solution applied to the bath & given sufficient contact time?
🔺 17. Did the candidate pay particular attention to cleaning the taps, overflow, plug & plug hole?
🔺 18. Did the candidate clean all surfaces of the bath working from the outside in?
19. Was the bath & surfaces rinsed thoroughly & wiped dry?
🔺 20.Was the slip mat cleaned on both sides & left to air dry?

Continue

21.Were waste bins emptied & cleaned?
22. Were mirrors & doors cleaned & consumables replenished?
23. Was attention given to the underneath of dispensers removing any soiling or build up?
24. Was a non-abrasive pad used?
🔺 25. Was the cloth recharged, re-folded or changed when needed?
🔺 26. Was the skill carried out systematically & in the correct order?
🔺 27. Did the candidate check for signs of damage/pests & report?
28. Was the appearance of the surfaces & surrounding area satisfactory?
🔺 29. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 30. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 31. Were warning signs removed, checked & cleaned?
🔺 32. Was ventilation closed?
🔺 33. Was hand hygiene carried out?

Results

Overall assessment score?
Minimum pass score of 24
Pass/Fail
Why was the assessment failed?
Additional Comments?
Assessor tick to agree.
Candidate tick to agree.

AU5 Washing Of Surfaces

AU5: Washing of Surfaces

Assessment Information

Assessment Date & Start Time
Assessment Finish Time
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code AU5

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information before starting?
🔺 4. Did the candidate confirm the location and content of the risk assessment/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution correctly prepared?
9. Was washing commenced starting at the outside edges & working inwards on horizontal surfaces?
10. Was rinsing carried out to remove cleaning agent on horizontal surfaces?
🔺 11. Were electrical points covered to prevent entry of water?
12. Was washing carried out from bottom to top on vertical surfaces?
13. Was rinsing carried out from top to bottom on vertical surfaces?
14. Was the cloth recharged, wrung out, re-folded & cleaning solution changed?
15. Was a non-abrasive pad used?
16. Was the cloth and cleaning solution changed when needed?
17. Were all surfaces left as dry as possible?
🔺 18. Did the candidate clean a manageable area at any one time to avoid over reaching?
19. Were the skills carried out systematically using straight overlapping passes?
🔺 20. Was Masking Tape removed from electrical points?
21. Was the appearance of the surfaces and surrounding area left satisfactory?
🔺 22. Did the candidate check for signs of damage/pests & report?
🔺 23. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 24. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 25. Were warning signs removed, checked & cleaned?
🔺 26. Was ventilation closed?
🔺 27. Was hand hygiene carried out?

Results

What was the score overall?
Minimum pass score of 24.
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

Assessment Information

Retest Date & Start Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code AU5

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used and sited correctly?
🔺 3. Did the candidate study the COSHH information before starting?
🔺 4. Did the candidate confirm the location and content of the risk assessment/SSOW?
🔺 5. Was the area ventilated?
🔺 6. Was the required PPE selected, checked & worn?
🔺 7. Was the correct equipment & materials selected, checked & safely assembled?
🔺 8. Was the cleaning solution correctly prepared?
9. Was washing commenced starting at the outside edges & working inwards on horizontal surfaces?
10. Was rinsing carried out to remove cleaning agent on horizontal surfaces?
🔺 11. Were electrical points covered to prevent entry of water?
12. Was washing carried out from bottom to top on vertical surfaces?
13. Was rinsing carried out from top to bottom on vertical surfaces?
14. Was the cloth recharged, wrung out, re-folded & cleaning solution changed?
15. Was a non-abrasive pad used?
16. Was the cloth and cleaning solution changed when needed?
17. Were all surfaces left as dry as possible?
🔺 18. Did the candidate clean a manageable area at any one time to avoid over reaching?
19. Were the skills carried out systematically using straight overlapping passes?
🔺 20. Was Masking Tape removed from electrical points?
21. Was the appearance of the surfaces and surrounding area left satisfactory?
🔺 22. Did the candidate check for signs of damage/pests & report?
🔺 23. Was equipment, materials & PPE checked, cleaned, dried & stored correctly?
🔺 24. Was the skill completed safely without damage or risk to people, fixtures & fittings?
🔺 25. Were warning signs removed, checked & cleaned?
🔺 26. Was ventilation closed?
🔺 27. Was hand hygiene carried out?

Results

What was the score overall?
Minimum pass score of 24.
Pass/Fail
Why was the assessment failed?
Additional Comments
Assessor tick to agree.
Candidate tick to agree.

SU1: Bodily Fluids & Sharps

Assessment Information

Assessment Date & Start Time
Assessment Finish
Total Assessment Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code SU1

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used & sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & content of the risk assessments/SSOW
🔺 5. Was the area ventilated?
🔺 6. Was the required disposable PPE selected, checked & worn?
🔺 7. Was the correct equipment/materials selected, checked & safely assembled?
8. Was the spillage/contamination reported correctly?
🔺 9. Did the candidate identify the spillage & assess the risk of contaminated items/area to be cleaned?
🔺 10. Was the cleaning solution prepared correctly?
11. Was the sanitizing product applied to the spillage & residue removed be absorption, scooping etc. & placed in a waste bag?
🔺 12. Was the cleaning agent applied to the spillage & sufficient contact time allowed?
🔺 13. Was the removal of the spillage carried out in a controlled manner working inwards to minimize further spreading?
14. Were contaminate items removed to the appropriate waste bag/box?
15. Was additional cleaning agent applied to the surface until spillage was completely removed?
🔺 16. Was the surface cleaned, sanitized, rinsed & dried?
🔺 17. Was all disposable equipment safely removed?
18. Were the waste bags & sharps box sealed & removed to the designated area for disposal?
🔺 19. Was the skill carried out systematically so that all areas were effectively & efficiently cleaned?
20. Was the appearance of the surfaces and surrounding areas satisfactory after completion?
🔺 21. Was equipment, materials & PPE cleaned, sanitized, checked, dried & stored correctly?
🔺 22. Was the skill completed safely without damage/risk to people, fixtures & fittings?
🔺 23. Were warning signs cleaned, checked, sanitized & removed?
🔺 24. Was ventilation closed?
🔺 25. Was hand hygiene carried out?

Results

Overall Assessment Score?
Minimum Pass Mark of 22
Pass/Fail
Why was the assessment failed?
Additional Comments?
Assessor tick to agree
Candidate tick to agree

Assessment Information

Retest Date & Start Time
Retest Finish
Total Retest Time
- 5 Minutes
- 10 Minutes
- 15 Minutes
- 20 Minutes
- 25 Minutes
- 30 Minutes
- 35 Minutes
- 40 Minutes
- 45 Minutes
- 50 Minutes
- 55 Minutes
- 1 Hour

Skill Code SU1

🔺 1. Was hand hygiene carried out?
🔺 2. Were warning signs used & sited correctly?
🔺 3. Did the candidate study the COSHH information?
🔺 4. Did the candidate confirm the location & content of the risk assessments/SSOW
🔺 5. Was the area ventilated?
🔺 6. Was the required disposable PPE selected, checked & worn?
🔺 7. Was the correct equipment/materials selected, checked & safely assembled?
8. Was the spillage/contamination reported correctly?
🔺 9. Did the candidate identify the spillage & assess the risk of contaminated items/area to be cleaned?
🔺 10. Was the cleaning solution prepared correctly?
11. Was the sanitizing product applied to the spillage & residue removed be absorption, scooping etc. & placed in a waste bag?
🔺 12. Was the cleaning agent applied to the spillage & sufficient contact time allowed?
🔺 13. Was the removal of the spillage carried out in a controlled manner working inwards to minimize further spreading?
14. Were contaminate items removed to the appropriate waste bag/box?
15. Was additional cleaning agent applied to the surface until spillage was completely removed?
🔺 16. Was the surface cleaned, sanitized, rinsed & dried?
🔺 17. Was all disposable equipment safely removed?
18. Were the waste bags & sharps box sealed & removed to the designated area for disposal?
🔺 19. Was the skill carried out systematically so that all areas were effectively & efficiently cleaned?
20. Was the appearance of the surfaces and surrounding areas satisfactory after completion?
🔺 21. Was equipment, materials & PPE cleaned, sanitized, checked, dried & stored correctly?
🔺 22. Was the skill completed safely without damage/risk to people, fixtures & fittings?
🔺 23. Were warning signs cleaned, checked, sanitized & removed?
🔺 24. Was ventilation closed?
🔺 25. Was hand hygiene carried out?

Results

Overall Assessment Score?
Minimum Pass Mark of 22
Pass/Fail
Why was the assessment failed?
Additional Comments?
Assessor tick to agree
Candidate tick to agree

BICSc Assessments

Free BICSc Assessments Checklist

Go digital today!

Convert your paper checklists into digital forms

Assessment Information

Skill Code: MU1

Results

Assessment Information

Skill Code: MU1

Results

Assessment Information

Skill Code: MU2

Result

Assessment Information

Skill Code: MU2

Result

Assessment Information

Skill Code MU3

Result

Assessment Information

Skill Code MU3

Result

Assessment Information

Skill Code BU1

Results

Assessment Information

Skill Code BU1

Results

Assessment Information

Skill Code BU2

Results

Assessment Information

Skill Code BU2

Results

Assessment Information

Skill Code BU3

Results

Assessment Information

Skill Code BU3

Results

Assessment Information

Skill Code BU5

Results

Assessment Information

Skill Code BU5

Results

Assessment Information

Skill Code BU6

Dusting

Damp Wiping

Results

Assessment Information

Skill Code BU6

Dusting

Damp Wiping

Results

Assessment Information

Skill Code BU9

Result

Assessment Information

Skill Code BU9

Result

Assessment Information

Skill Code BU10

Results

Assessment Information

Skill Code BU10

Results

Assessment Infotrmation

Skill Code BU12

Hand Wash Basins

Toilet Bowls

Urinals

Continue

Results

Assessment Infotrmation

Skill Code BU12

Hand Wash Basins

Toilet Bowls

Urinals