Title Page
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
TECHNICIAN NAME
-
DATE TASK PERFORMED
-
BIOTECH BUILDING
-
EQUIPMENT ASSET #
AHU ANNUAL MAINTENANCE
-
LUBRICATE FAN AND MOTOR BEARINGS PER MANUFACTURERS' RECOMMENDATIONS
-
REPLACE ALL BELTS ANNUALLY, ADJUST AS REQUIRED
-
LUBRICATE AND ADJUST DAMPERS AND LINKAGES
-
CHECK AND CLEAN CONDENSATE DRAIN PAN
-
APPLY TIME-RELEASED ALGAECIDE/BIOCIDE CONDENSATE PAN TABS
-
CHECK MOTOR OPERATING CONDITIONS
-
CHECK ELECTRICAL CONNECTIONS
-
INSPECT CONTACTORS
-
CHECK RELAYS
-
INSPECT OPERATING CONTROLS
-
INSPECT SAFETY CONTROLS
-
START COMPRESSOR, CHECK OPERATING CONDITIONS
-
CHECK FAN
-
INSPECT SHAFT AND BEARINGS
-
TAKE SUPPLY TEMPERATURE READINGS- CHECK FOR ABNORMALITIES
-
TAKE RETURN TEMPERATURE READINGS- CHECK FOR ABNORMALITIES
-
CLEAN OUTSIDE AIR INTAKE SCREEN
-
CHECK FRESH AIR INTAKE SETTINGS (ECONOMIZER)
-
SECURE UNIT PANELS AND INSPECT ROOF CURB FLASHING
POWER WASH COILS
-
APPLY BIODEGRADABLE CLEANING AGENT
-
PERFORM CHEMICAL CLEANING/POWER WASH (AS NEEDED)
-
CLEAN COIL FACE AND FINS
AIR FILTER SERVICE
-
PROVIDE AND REPLACE AIR FILTERS
-
PROVIDE AND REPLACE FINAL AIR FILTERS
OPERATING INSPECTIONS
-
ADJUST BELTS FOR PROPER TENSION
-
INSPECT DRIVE PULLEYS/SHEAVES
-
INSPECT LINKAGE
-
INSPECT FAN ASSEMBLY
-
INSPECT FAN BLADE ROTATION FOR PROPER BALANCE
-
CHECK FAN MOTOR OPERATION
-
CHECK MOTOR MOUNTS
-
INSPECT CONTACTORS
-
CHECK AIR INTAKE SET POINTS
-
SECURE UNIT PANELS AND INSPECT ROOF CURB FLASHING
EXHAUST/RETURN FANS
-
PROVIDE AND REPLACE BELT(S) ANNUALLY
-
ADJUST BELT TO PROPER TENSION
-
LUBRICATE BEARINGS
-
INSPECT SHAFT ROTATION
-
INSPECT FAN ROTATION FOR PROPER BALANCE
-
CHECK MOTOR OPERATING CONDITIONS
-
INSPECT ELECTRICAL CONNECTIONS
-
INSPECT MOTOR COILS
