Title Page
-
Station
-
Fleet Number / Serial Number
-
Engineer's Print Name
-
Engineer's Staff Number
-
Prepared by
-
Date
-
Location
BLANK A.C. JACK CHECK SHEET
-
INSTRUCTIONS
---------------------
1. Please answer the questions provided below.
2. Add photos and notes by clicking on the paperclip icon.
3. To add a Corrective Measure click on the paperclip icon then "Add Action", provide a description, assign to a member, set priority, and due date.
3. Complete audit by providing digital signature.
4. Share your report by exporting as PDF, Word, Excel or Web Link. -
NOTE:
STORAGE OF JACKS
1. If the jack is stored with the legs removed, the body should be placed upright.
2. Every six months, pump up the ram and then lower it to check that the jack is fully operational.
3. When jacks are stored in hot climates, it is recommended that functional checks are made every month.
ALL AIRCRAFT JACK TYPES
-
Please select Check Cycle
- A SERVICE = 12 WEEKS
- B SERVICE = ANNUALLY
-
• A SERVICE = 12 WEEKS
-
1. Check level of oil in reservoir when the ram is in the down position and top up if necessary. If different jack oil is used the reservoir must be drained completely before refilling.
-
2. Check pumps for correct operation.
-
3. Check jack for leaks, if there is any leakage tighten or replace seal as necessary.
-
4. Visually inspect legs, castor wheels and transportation wheels and renew components where necessary.
-
5. Lubricate and grease all nipples.
-
• B SERVICE = ANNUALLY
-
1. Check level of oil in reservoir when the ram is in the down position and top up if necessary. If different jack oil is used the reservoir must be drained completely before refilling.
-
2. Check pumps for correct operation.
-
3. Check jack for leaks, if there is any leakage tighten or replace seal as necessary.
-
4. Visually inspect legs, castor wheels and transportation wheels and renew components where necessary.
-
5. Lubricate and grease all nipples.
-
6. Remove Jack legs if applicable.
-
7. Flush out reservoir and refill oil.
-
8. Check SWL decal is legible.
-
9. Assemble legs to body if removed.
-
10. Apply Safe Working Load (jack aircraft) and ensure satisfactory operation no leaks and jacks supports axle without sinking.
COMPLETION
-
Engineer's Name and Signature
-
Auditor's Name and Signature
