Contract information and Checks
Is the Height To Underside the same as contract?
X = beam
P = post
V = vertical bracket
Snb = Swan neck bracket
Bay Sizes on Contract.
Are the bay sizes Installed the same as above (or changes have been authorised by the office/customer)?
What are the bay sizes Installed?
Have changes to contract been authorised by the office?
Have changes to contract been authorised by the customer?
Are the bay sizes kept to small bays where possible (applies to domestic only)?
Have the correct number of mini beams been installed?
Are the foundation sizes correct as visible from the re-instate?
Have all beams been fixed by the correct method to specification (i.e have adequate brickwork above, or the correct brackets/posts applied)?
Installation Quality Checks
Are all beams and mini beams of good quality?
Are the beams around the fixing points of good standard?
Is the steelwork of good quality and free from chips?
Is the weld on the steelwork neat and of acceptable quality?
Are the roof sheets installed correctly (no overlapping visible)?
Are the fascia joints in line and connected with 4 bolts?
Are the side and front fascia neatly jointed?
Is the area free from brick dust and debris?
Is the canopy completely capped/tipped/bunged?
Are the gutter brackets spaced out at 800mm (or below) centres?
Are there a minimum of 3 down-pipe clips per down-pipe?
Has the GRP flashing been installed correctly?
Is the canopy level?
Is the customer happy with the canopy?
Is the customer happy with the sales service they have received?
Is the customer happy with the installation service received?