Cisco Eagle QA Check List V2 - duplicate

Does the gate type match the order?

MAKE SURE THAT THERE ARE NO NAMEPLATES!!!!!!!!!!

Was the gate Paperwork signed off?

Have all of the serial numbers been recorded?

Motor lever push test?

Is the motor lever bolt tight?

Are the flange shaft bearing positioned correctly?

Was the gate tested?

Is the up/down switch installed?

Is the MBS controller installed?

Is a MIB power board installed with an extra ground terminal block?

Does the control board have 15 terminal blocks?

Does one inductive limit switch only have one cam for the down position?

Does one inductive limit switch only have one cam for the up position?

Does the gate have a "tested by" sticker signed?

Does the motor type match the gate type? (MC63C-270)

Are there yellow marks on the upper lever bolts?

Does the gate serial number sticker match the gate type?

Does the color match the order?

Does the gate have a special color request?

Does the door match the housing?

Does the hood match the housing?

Are the housing and hood holes drilled to the correct dimensions?

Does the gate have any accessories?

Is the tubular boom made of aluminum?

Are the boom attachment bolts included?

This includes 3 bolts, washers, etc.

Are 2 stop signs included?

Are the stop signs made of metal?

Are the U-rails included?

Is anything else ordered with the gate that needs to be packaged?

Is anything else ordered with the gate that should be installed?

Does the gate have special wiring?

Are 2 keys included?

Are 2 warning stickers included?

Is the overall fit and finish up to Magnetic Quality?