Claytons Site Coordinator signoff - V 3.0

• Site conducted

  Select

• Job Number:

• Address:

• Installers Name

• QA Completed By

• Conducted on

  Date

• THIS QA CHECKLIST IS TO BE COMPLETED IN CONJUNCTION WITH THE INSTALLAUS INSTALLATION GUIDELINES

• Enter room name

  Select Kitchen Butlers Bathroom/Powder Ensuite Laundry Media units Desks and Study Wardrobes

  • Kitchen
  • Butlers
  • Bathroom/Powder
  • Ensuite
  • Laundry
  • Media units
  • Desks and Study
  • Wardrobes

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Is island square and in the correct position as per plans. Photos of tape

  Yes

  No

  N/A

• Is island fixed to floor with liquid nails or silicone

  Yes

  No

  N/A

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are end panels set in 1mm from barback, and secured to barback below kicker height?

  Yes

  No

  N/A

• Are oven cleats and fillers set back correct amount and fillers secured correctly.

  Yes

  No

  N/A

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

• Does Island section have waterfall ends?

  Yes

  No

  N/A

• Are bar panels to plan and finishing flush with carcass ends

  Yes

  No

• Does the Job have integrated DW and kicker

  Yes

  No

• Has it been stored correctly, take photos

  Media

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Does job have 18mm substraights for 40mm stone?

  Yes

  No

• Are 18mm MDF substraights set back 20-25mm from oven openings and island ends?

  Yes

  No

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Is job ready for stone install (stone measure between panels is correct?, Square at corners, Fillers correct sizes? Stone goes under window or butts up at correct height? All cabinets installed?)

  Yes

  No

  N/A

• Have you informed Mabut or scheduling to put stone on hold

  Yes

  No

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A

Appliance's

• Is Range hood cabinet or void as per job specifications

  Yes

  No

  N/A

• Is Rangehood a slide out? if yes, is rail at back 300mm from front of rangehood doors? Add Photo

  Yes

  No

  N/A

• Oven space or void as per job specifications, with oven rails set correctly

  Yes

  No

  N/A

• Confirm you have checked the specifications of any special appliances

  Yes

  No

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Do pot draws have screws at front of draw runners to prevent dropping?

  Yes

  No

  N/A

• Is additional hardware installed (Bins, Pullout Pantrys, Slide out spice cabinets etc)

  Yes

  No

• Is all installed as per spec, and functioning correctly? Add photos

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are oven cleats and fillers set back correct amount and fillers secured correctly.

  Yes

  No

  N/A

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Does job have 18mm substraights for 40mm stone?

  Yes

  No

• Are 18mm MDF substraights set back 20-25mm from oven openings and island ends?

  Yes

  No

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A

Appliance's

• Is Range hood cabinet or void as per job specifications

  Yes

  No

  N/A

• Is Rangehood a slide out? if yes, is rail at back 300mm from front of rangehood doors? Add Photo

  Yes

  No

  N/A

• Confirm you have checked the specifications of any special appliances

  Yes

  No

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Do pot draws have screws at front of draw runners to prevent dropping?

  Yes

  No

  N/A

• Is additional hardware installed (Bins, Pullout Pantrys, Slide out spice cabinets etc)

  Yes

  No

• Is all installed as per spec, and functioning correctly? Add photos

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are access cutouts needed and if so are they in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

• Yes

  No

Carcass'

• Are All cabinets secured properly?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

Doors and Panels

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are access holes required? if so are they in correct positions? add photos

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

• Is Washing machine space as per specs. Add Photos

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is additional hardware installed (Bins, Pullout Pantrys, Slide out spice cabinets etc)

  Yes

  No

• Is all installed as per spec, and functioning correctly? Add photos

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all panels level and plumb? Add Photos.

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is additional hardware installed (Bins, Pullout Pantrys, Slide out spice cabinets etc)

  Yes

  No

• Is all installed as per spec, and functioning correctly? Add photos

  Yes

  No

• Are hanging rails level and at correct heights

  Yes

  No

  N/A

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

• Enter room name

  Select Kitchen Butlers Bathroom/Powder Ensuite Laundry Media units Desks and Study Wardrobes

  • Kitchen
  • Butlers
  • Bathroom/Powder
  • Ensuite
  • Laundry
  • Media units
  • Desks and Study
  • Wardrobes

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Is island square and in the correct position as per plans. Photos of tape

  Yes

  No

  N/A

• Is island fixed to floor with liquid nails or silicone

  Yes

  No

  N/A

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are end panels set in 1mm from barback, and secured to barback below kicker height?

  Yes

  No

  N/A

• Are oven cleats and fillers set back correct amount and fillers secured correctly.

  Yes

  No

  N/A

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

• Does Island section have waterfall ends?

  Yes

  No

  N/A

• Are bar panels to plan and finishing flush with carcass ends

  Yes

  No

• Does the Job have integrated DW and kicker

  Yes

  No

• Has it been stored correctly, take photos

  Media

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Does job have 18mm substraights for 40mm stone?

  Yes

  No

• Are 18mm MDF substraights set back 20-25mm from oven openings and island ends?

  Yes

  No

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Is job ready for stone install (stone measure between panels is correct?, Square at corners, Fillers correct sizes? Stone goes under window or butts up at correct height? All cabinets installed?)

  Yes

  No

  N/A

• Have you informed Mabut or scheduling to put stone on hold

  Yes

  No

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A

Appliance's

• Is Range hood cabinet or void as per job specifications

  Yes

  No

  N/A

• Is Rangehood a slide out? if yes, is rail at back 300mm from front of rangehood doors? Add Photo

  Yes

  No

  N/A

• Oven space or void as per job specifications, with oven rails set correctly

  Yes

  No

  N/A

• Confirm you have checked the specifications of any special appliances

  Yes

  No

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Do pot draws have screws at front of draw runners to prevent dropping?

  Yes

  No

  N/A

• Is additional hardware installed (Bins, Pullout Pantrys, Slide out spice cabinets etc)

  Yes

  No

• Is all installed as per spec, and functioning correctly? Add photos

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are oven cleats and fillers set back correct amount and fillers secured correctly.

  Yes

  No

  N/A

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Does job have 18mm substraights for 40mm stone?

  Yes

  No

• Are 18mm MDF substraights set back 20-25mm from oven openings and island ends?

  Yes

  No

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A

Appliance's

• Is Range hood cabinet or void as per job specifications

  Yes

  No

  N/A

• Is Rangehood a slide out? if yes, is rail at back 300mm from front of rangehood doors? Add Photo

  Yes

  No

  N/A

• Confirm you have checked the specifications of any special appliances

  Yes

  No

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Do pot draws have screws at front of draw runners to prevent dropping?

  Yes

  No

  N/A

• Is additional hardware installed (Bins, Pullout Pantrys, Slide out spice cabinets etc)

  Yes

  No

• Is all installed as per spec, and functioning correctly? Add photos

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are access cutouts needed and if so are they in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

• Yes

  No

Carcass'

• Are All cabinets secured properly?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

Doors and Panels

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are access holes required? if so are they in correct positions? add photos

  Yes

  No

  N/A

Hardware

• Handles as per job specifications and guidelines?

  Yes

  No

• Is all hardware in good working order? (draws running freely, soft close closing completley, hinges correct)

  Yes

  No

• Does job have soft close hinges?

  Yes

  No

• Are all doors soft closing as per spec?

  Yes

  No

• Does the room have soft close draws?

  Yes

  No

• Are draw side clips attached to all draws? Take photos

  Media

• Add photos of all elevations

  Media

ADS Maintenance / Installer Notes / Builders Feedback

• Is a maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is another maintenance required in this room?

  Yes

  No

• Enter the part/s required along with size/s

• Department at Fault

  Select Sales Design Purchasing Manufacturing Scheduling Logistics Site IT Builder ADS

  • Sales
  • Design
  • Purchasing
  • Manufacturing
  • Scheduling
  • Logistics
  • Site
  • IT
  • Builder
  • ADS

• Why allocated to that department (in short)

• Install time required (excluding travel)

  Select .25 .5 .75 1hr 1.5 2hr 3hr 4hr 5hr 6hr 7hr 8hr

  • .25
  • .5
  • .75
  • 1hr
  • 1.5
  • 2hr
  • 3hr
  • 4hr
  • 5hr
  • 6hr
  • 7hr
  • 8hr

• Is there any issues for the builder to be aware of?

  Yes

  No

• All notes entered here will appear on the builders report

Carcass'

• Are All cabinets secured properly? Base cabinets fixed, overheads secured with glue behind where required, island firmly stuck?

  Yes

  No

• Are the Carcass' free of damage?

  Yes

  No

• Are all Carcass' installed in correct locations and LEVEL? Add Photos

  Yes

  No

• Is there a void on island, or are carcasses packed off of walls?

  Yes

  No

  N/A

• Are voids, or packing of carcasses done to specification? Add photos of tape measuring void

  Yes

  No

  N/A

Doors and Panels

• Are all kickers and bulkheads square/parallel

  Yes

  No

• Are all doors and panels aligned as per guidelines? Add photos of All door margins and draw margins

  Yes

  No

• Are doors and panels free of damage?

  Yes

  No

• Are all infills and panels no more gaped to walls?

  Yes

  No

• Are stickers marks and glue residue cleaned off all door and panels?

  Yes

  No

Benchtops

• Are all bench tops free of damage

  Yes

  No

  N/A

• Add photos of all edges of benchtops

  Media

• Are all benchtops no more gaped to walls?

  Yes

  No

  N/A

• Are cutouts as per specs for HP, Sinks, Basins or troughs.

  Yes

  No

• Are cutouts square and free of chips?

  Yes

  No

• Are cutouts in correct positions? If yes, Add photo to show

  Yes

  No

  N/A

• Undermount cutout rebated + Tap hole drilled?

  Yes

  No

  N/A