Audit
Following the details listed below ensure that all tenant entrances are maintained to the highest possible standard at all times
The areas in front and to the sides of all entrances will be maintained free from debris, litter, spills etc.
After cleaning, both sides of entrance and reception area glass to be free of all marks, streaks and smears
All streaks and runs to be removed from surrounds as they occur
All areas will be maintained free from debris, litter etc...
Gritting of slippery areas to be carried out as necessary
NOTE: In the context of this schedule, hard floors include terrazzo, linoleum, PVC and thermoplastic, marble, lime stone tile etc. All hard floors are to be maintained in accordance with manufacturers instructions.
Swept or mop swept floors to be free of all dust and litter. No build up of dust and soilage at edges, under furniture or in corners to be permitted.
Damp or wet mopped floors to be free of all scuffmarks and soilage adhering to floor.
Buffed or spray cleaned floors to have an even sheen, free of scuffs and to be of good general appearance.
Entrance barrier mats to be cleaned so as to provide an effective barrier to the ingress of soil and water by removing as far as possible accumulations of soilage within the mat.
Wells after cleaning to be free if all accumulation of litter, debris and soilage in general. Tiled frontages to be wet mopped.
The contractor shall also provide mats for building entrances and other locations, which shall be changed as directed by RSMD staff, but no less than 1 year.
Stairs and intermediate landing to be maintained so as to be free of dust, debris, tarter ears, smears, fluff and any other soilage. Particular attention to be given to edges, corners, strings and risers to ensure no accumulation or build up of soilage occurs.
Banister rails and balustrades, including side panels, to be free of dust after dusting. Specialist products to be used on appropriate services. I.e. Brass or wood cleaning
Spot cleaning and damp wiping to remove all stains, marks, streaks, finger marks or other soilage.
Runners to be kept free of accumulation of grit, debris and other materials interfering with the operation of the lift doors.
Control panels and surfaces to be cleaned and polished so as to be free of finger marks, smears, streaks and any other soilage.
All surfaces to be free of dust and smears after dusting.
All finger marks, smears, stain and general soilage to be removed during cleaning by spot cleaning, damp wiping or washing as appropriate, to leave surfaces clean, dry and smear free.
No smears, streaks or buildup of soiling, particularly on the skirting and door kick plates to be permitted.
Walls to be free of dust and smears after dusting
Brightwork and door furniture to be maintained so as to be tarnish free. Metal polish to be washed from brightwork before drying and buffing
To be free of dust, smears, streaks and stains after cleaning.
Dust to be suction cleaned from voids between secondary glazing and windows.
Within many of the buildings there are staircases, landings and corridors leading to basement or roof plant rooms that are only accessed by contractors or RSMD staff. These need to be serviced once a month to ensure that they are are free from dirt, dust and rubbish, with all surfaces bring treated In accordance to daily scope
Greenery cut and left in safe area