Colchester Triumph 2000 Lathe Maintenance Checklist

• Conducted on

  Date

• Conducted by

• Location:
  Address

• Equipment required: Basic Hand Tools

• Has the lathe been isolated and locked off and is safe to work on

  Safe

  At Risk

  N/A

• Wipe down machine using contact cleaner, clear out all swarf from bed and collection tray underneath.

  Compliant

  Non-Compliant

  N/A

• Run through X/Y axis on the lathe bed, making sure it moves smoothly along the full way.

  Pass

  Fail

  N/A

• If required, remove slides, clean down and re-insert and ensure bed moves smoothly.

  Pass

  Fail

  N/A

• Remove gearbox cover and inspect (visually) all gears, top up oil if required

  Pass

  Fail

  N/A

• Remove side cover to expose belts and inspect for wear, check they move freely and replace any damaged belts

  Pass

  Fail

  N/A

• Inspect both sets of chuck jaws for damage, report if damage found

  Pass

  Fail

  N/A

• Inspect tool posts and attachments, report any damaged/distorted tools.

  Pass

  Fail

  N/A

• Remove coolant tray from behind the lathe and clean out coolant skin and clean down pump.

  Compliant

  Non-Compliant

  N/A

• Refill coolant tray with fresh coolant and run through until fresh coolant is present out of the hose (replace hose if clogged)

  Compliant

  Non-Compliant

  N/A

• Put all tools and chemicals (coolant, cleaner) used back into their respective locations

  Compliant

  Non-Compliant

  N/A

• Fill out and sign off risk assessment and upload *this* report and RA to BAB Activ.

  Compliant

  Non-Compliant

  N/A

Additional Notes

• undefined

Operator sign off

• Operators Signature

  Sign