Execution of Work

Hangers

  • Are hangers straight and plumb?

  • Are hangers installed to manufacturer's guidelines?

  • Are hanger and supports proper spaced and independently supported?

  • Are hanger damaged or been removed by other trades?

  • Are hangers installed to NFPA 13 standards?

  • Are hangers of the CORPS listed approved material

Pipe, Fittings and Valves

  • Is proper schedule of pipe being used? (2-1/2" and larger diameter pipe Schedule 10 and 2" and smaller diameter pipe Schedule 40)

  • Is pipe free of physical damage?

  • Is pipe and fittings installed free of foreign debris or corrosion?

  • Are joints and fittings properly installed

  • Verify that indicating valve is working and in the correct position for system condition?

  • All floor control valves are installed properly

  • All valves and devices are accessible

  • Drain line installed

  • Are all outlet capped and plugged at the end of shift?

  • No piping, wiring or duct is touching sprinkler pipe

  • No more than 4 threads visible on threaded joints?

  • All bolts shall extend no less than three full threads

  • Are all bolts torqued to manufacturer's guidelines?

  • Has all pipe been pressure/water tested?

  • All material installed meet CORPS approval?

Sprinkler Heads and Flexible Connections

  • Are the proper temperature rating sprinkler heads installed?

  • Are brackets attached to ceiling grid as per manufacturer's guidelines

  • Are sprinkler head guards installed properly

  • Are sprinkler heads obstructed?

  • Are sprinkler heads free of paint, corrosion, or other non-approved contaminants?

  • Are sprinkler heads located at least 1 foot away from diffuser?

  • All material installed meets CORPS approval ?

Design Installation

  • Are hangers within 12" of the end of the line

  • No sprinkler heads are further than 7'-6" or closer than 6" from walls

  • Sprinkler heads are installed under ductwork 4'-0" or greater

  • Mechanical rooms with ceilings lower than 8' above FF have sprinkler heads with guards?

  • Do sprinkler spacing exceed 130 sq. ft. in ordinary hazard areas.

  • Do all low points in sprinkler system exceeding 5 gallons must have a drain?

Miscellaneous

  • Work area is clean and free debris (cut off rods, plastic plugs and caps)

  • Is fire stopping installed at all wall and/or floor pentrations

  • Is sprinkler system(s) installed as per drawings?

Comments

Material Deficiency

Installation Deficiency

Damaged Material

Additional Comments

  • Additional Pictures

  • Add signature

  • Witness Signature

  • Witness
  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. Any ratings or scores displayed in our Public Library have not been verified by SafetyCulture for accuracy. Users of our platform may provide a rating or score that is incorrect or misleading. You should independently determine whether the template is suitable for your circumstances. You can use our Public Library to search based on criteria such as industry and subject matter. Search results are based on their relevance to your search and other criteria. We may feature checklists based on subject matters we think may be of interest to our customers.