Title Page
-
Site
-
Document No.
-
Job Number
-
Client
-
Cable number
-
Destination
-
Conducted on
-
Prepared by
Untitled Page
Visual Inspection
-
Inspect cable for damage. Is cable in good condition?
-
Please describe issue. Add photos
-
Is the cable clearly and permanently tagged with the correct tag
-
Please describe issue
-
Is the cable the correct type and size as per the cable schedule
-
Is the cable correctly terminated at source? Add photos
-
Is the cable correctly terminated at the destination? Add photos
-
Is the cable correctly fixed/supported/protected?
-
Is the cable glanded/grouted correctly? Glands tight? Add photos
Continuity testing.
-
Test the tester before use. Plug transmitter and receiver into short cable stored in tester pouch. All test lights should align. Do not proceed if test fails. Test ok?
-
If no, try a different tester or cable. Did this solve the problem?
-
Now test the cable. Plug in the transmitter at source. Plug in the receiver at the destination. Return to the transmitter. Ensure all lights operate in sequence. Go back to the receiver. Ensure all lights operate in sequence. Test ok?
-
Please describe issue. Add photos
Close out
-
Drawings marked up as constructed?
-
Is the cable finished and fit for service?
-
Comments (tagged, locked out, etc)
-
Sign off