Demolition (OFSC)

• Audit Title

• Document No.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Demolition (OFSC)

• There is a demolition plan which identifies all hazards and assigns risk and controls to each identified hazard.

  Yes

  No

  N/A

• A demolition plan has been established in accordance with applicable legislation, standards (i.e.; AS 2601) and any other relevant codes applicable to the work.<br>Eg Hot work standard.<br>

  Yes

  No

  N/A

• All applicable demolition phases of the project have been incorporated within the project risk assessment (or similar) and identify associated hazards, assess risks and outlines controls to be implemented as per applicable legislation, standards and codes.

  Yes

  No

  N/A

• Building structure and materials have been considered prior to starting demolition.

  Yes

  No

  N/A

• Structure and site investigations have been performed and in accordance recognised standards.

  Yes

  No

  N/A

• Engineer design details, plans and certifications of all demolition loadings, including temporary loads associated with plant and machinery and impact loads etc.

  Yes

  No

  N/A

• Investigations have considered hazardous materials (including asbestos if relevant) and have been taken into account within the demolition work plan.

  Yes

  No

  N/A

• Location of all services have been identified and documented and the relevant services have been disconnected or made safe by a suitable qualified person prior to demolition.

  Yes

  No

  N/A

• Service location surveys have been performed and the location of all services eg;<br>LP Gas<br>LNG<br>Medical Gases<br>Electrical<br>Hydraulic <br>Data <br>Have been documented and marked in relevant locations.

  Yes

  No

  N/A

• A procedure outlines a requirement to disconnect or make safe (including protection) all relevant services, and obtain clearance certificate/confirmation from relevant entity and/or Qualified tradesperson.

  Yes

  No

  N/A

• Evidence of verification of isolation of services.

  Yes

  No

  N/A

• Lockout tag out process is implemented, where applicable.

  Yes

  No

  N/A

• There are controls in place to prevent falls from height, including appropriately fixed covers and guards on openings and penetrations.

  Yes

  No

  N/A

• Fall risks and penetrations are identified within SWMS/JSAs, project risk assessment and/or demolition plan and control measures established in accordance with, jurisdictional legislation, standards and codes.

  Yes

  No

  N/A

• Temporary bracing, shoring or propping is inspected on a daily basis to ensure tight, stable and secure.

  Yes

  No

  N/A

• Openings and penetrations are securely covered or guarded to prevent inadvertent access.

  Yes

  No

  N/A

• Penetration controls are regularly monitored and inspected.

  Yes

  No

  N/A

• There are appropriate protective structures in place to prevent falling objects.

  Yes

  No

  N/A

• The project risk assessment and/or demolition plan has determined the appropriate controls to prevent falling objects risks, where applicable, and the level of protective structures to be put in place is in accordance with the hierarchy of controls.

  Yes

  No

  N/A

• Hoarding and overhead protective structures have been properly established in accordance with the PRA and demolition plan to protect people where the demolition adjoins a public or client shared area.

  Yes

  No

  N/A

• Hoarding and overhead protective structures are, as a minimum, in accordance with jurisdictional legislation, standards and code requirements.

  Yes

  No

  N/A

• Design and certification by registered engineer of overhead protective structure conforming to relevant requirements.

  Yes

  No

  N/A