Title Page

  • Site conducted

  • Conducted on

  • Prepared by

  • Location

1) Pre Drill Access

  • Inspection Checklist Surface Diamond Drill Rig & Site

  • Rig #: 1

  • Drill Crew:

  • Date:

  • Inspected By:

  • Hole ID:

  • Is there signage to the drill?

  • Travelway & Entrance to Drill Site

  • Safe access to site, nothing impeding access to work site?

  • Hazards at worksite excess water, dead trees, loose bolders, etc. describe

  • All tripping hazards controlled or removed?

  • Is there a "Drilling in Progress/Authorized Personnel " sign in vicinity?

  • Was a site orientation given before the inspection process?

2) Job Environment

  • Are preshift inspections completed, available?

  • Is the work area clean and organized?

  • Have tripping hazards been eliminated?

  • How are rods being stored?

  • What is in place to prevent drill rods from falling?

  • Is garbage controled in sealed garbage bins?

  • Is there adaquate lighting in work area?

3) Drilling Equipment and Layout

  • Is the permit to work (drill layout) at the drill site?

  • Are all permits attached (surface disturbance)

  • Is all rotating equipment properly guarded or barricaded?

  • Are hydraulic hoses in good condition without signs of wear?

  • Are controls in good condition, functioning properly and labelled?

  • Are hand tools clean, organized, free of damage?

  • Are platforms in good condition? Secure?

  • Are applicable railings installed? Able to withstand 600lbs?

  • Are stairways in good condition? Secured ?

  • Is engine protected from any potential contact from other drill components

  • Are stiff legs (jacks) installed with pin and keeper?

  • Are drip pans in place w/ plugs? Spill matting being used and changed?

  • Are tongue/draw bars in good conditoin? Lowered or secured up?

4) Emergency Response and Safety Equipment

  • Are workers aware of emergency procedures? Are procedures accessible?

  • Muster point; are workers aware of location? Safe access to?

  • Is there a communication source on site?

  • Are there emergency contact numbers (ERP) at the drill?

  • Are all hazardous condition monitoring equipment (lightening detection) in place?

  • Are emergency shut down devices (E-stop) in working order? How many located?

  • Is there a rotation barrier door interlock, is it operational

  • Is there an equipped, regularly inspected first aid kit on site?

  • Is there a proper eyewash station on site? Has it expired

  • Is it accessible, current (not expired)?

  • Other signage present (First aid, eye wash, muster point, oil storage, spill kit)

undefined

6) Electrical

  • Electrical equipment and wiring free of frays, cracks or defects?

  • Electrical fixtures/receptacles in good shape?

  • Do all cords have ground plug?

  • Is wiring/cables secure and out of the way?

  • Is there a lockable master switch

6) Fire Protection

  • Are functional fire extinguishers accessible at the drill site?

  • Are all fire extinguishers free of damage and rust?

  • Are all fire extinguishers inspected monthly?

  • Is there unobstructed access to additional fire fighting gear? (shovel, pump pack, axe, water bucket)

7) Fire extinguishers

  • drill shack

  • minimum required

  • fuel sloop

  • generator/rod sloop

  • pump shack

8. Support Equipment

  • Are wheel chocks being used?

  • Are backup alarms installed/operational on all vehicles?

  • Are vehicles equipped with first aid kits?

  • Are vehicles equipped with working Fire Extinguishers?

  • Are lights operational on all vehicles?

  • Are winch cables/hooks in good condition?

  • Is local smoking legislation being followed?

9) Environmental management system

  • Are cuttings controled? Describe

  • Are barricades & signs in place around sumps?

  • Is a spill kit present, clean, sealed and labelled?

  • Is drill equipment free of leaks? Spill matting being used and changed?

  • Is secondary containment used under petroleum products?

  • Are oily rags/gloves disposed of in an enclosed container?

  • Is waste oil being stored and labeled?

  • Is waste metal being separated in containers?

  • Do all containers, pails etc, have proper WHMIS labels?

8. Pump Shack

  • Are than any hazards as to location of pump shack?

  • Is pump shack level?

  • Are stairs, railings, decks in good condition and secured?

10) Crew Signatures

  • Supervisor Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.