DTP Scoping - Culvert Modification Location

• Project Name

  Select

• Conducted on

  Date

• Prepared by

• Site Number

• Road Name

  Select
• GPS Location
  Address

• Location Extended Description (e.g. Snakes Back or Near Buckleys Road)

• Chainage

• Measured From KM Post

• Direction of travel

  Select

• Existing Lane Width (m)

• Existing Sealed Shoulder Width (m)

• Add a photo of the location looking down the road in each direction

  Media

• Is this a Round Pipe or Box Culvert?

  Round

  Box

• What is the pipe diameter? Inside of pipe.

• What is the pipe made of?

• What is the width of the box culvert? inside

• What is the height of the box culvert? Inside

• What is the culvert made of?

• Does the culvert currently have an end wall?

  Yes

  No

• What is the condition of the end wall?

• Add a photo of the pipe and end wall

  Media

• What is the offset to the end of the culvert from the edge line?

• Details of work required

• Try to include as much detail as possible eg. extend culvert by 1 x 1.2m length and install 1 x wing wall, minor earth works required to clean out outlet to fit pipe. Beaching and fill also required. General rule pipes are 2.4m long and box culverts are 1.2m long but they can be cut down. Include a photo of the area below.

Media

• Photos

  Media

• Sketch of site

  Drawing