Information
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
Existing Machine
-
Is there an existing Machine in place?<br>
-
Type of Machine- Pass-Through, rack , flight etc
-
Make/Model/Serial No if available
-
Machine only measurements (HxWxDmm)
-
Are Tables being Replaced
-
Select relevant table descriptions (Multiple Choice)
- Free Standing
- Machine Supported
- Fixed to floor/wall
- Removable
-
Inlet Table Measurements (HxWxD)mm
-
Outlet Table Measurements (HxWxD)mm
-
Outline of room layout with Dimensions
-
Direction of Machine feed
-
Photo of existing set up (Landscape)
-
Would customer like existing machine removed
New Installation
-
If No is Boost Pump Required
-
Drainage Type (Multiple Choice)
- Gravity
- Pumped
- 2 Inch
- 1 1/4 inch
-
Is a Water Softener Required (Multiple Choice)
Electrics
-
Is there Suitable live power supply within 1 meter
-
What power Supply is available
-
Amps per Phase
-
Photo of Isolation and Fuse Box
-
Photos Of Area where machine is going (landscape, Full View)
-
Is Machine a straight line set up.
-
Additional machine Set up information
-
If needed
Water
-
Is the water supply within One Meter
-
Water Supply Pipe Diameter
-
Can water supply be Isolated
-
Is the machine going on a Hot or Cold Supply
-
Is water pressure above 1.5 bar
Site Access
-
is help available
-
Is Parking Available- if Yes where, if No is there any locally
-
Will the boxed Machine go from the outside of the building and into the room of installation
-
If No to above- Options
-
If NO , is there a lift available
-
Is machine going on ground floor
-
Will customer be using our chemicals