Title Page
-
Site conducted
-
Conducted on
-
Location
-
Prepared by
-
Job completed by
Main page
General observations and recommendations
-
Observations and recommendations EIC/EICR
Installation details and access
-
Property description
-
Access granted yes/no
-
Access granted to main electrical intake yes/no
Intake equipment (visual inspection only)
-
Service cable
-
Service head
-
Earthing arrangement
-
Isolator (where present)
-
Sub-Main cable size
-
Consumers isolator (where present)
-
Metering equipment
-
Consumer’s meter tails
-
Consumer’s meter tails size mm
Earthing/Bonding arrangements
-
Presence and condition of distributor’s earthing arrangements.
-
Earthing conductor size (mm2)
-
Provision of earthing/bonding labels at all appropriate locations
-
Accessibility and condition of earthing conductor and MET
-
Presence and condition of main protective bonding conductors
-
Main protective bonding conductors size (mm2)
-
Condition and accessibility of main protective bonding conductor connections
-
Accessibility and condition of other protective bonding connections
-
Main protective bonding confirmed to
- Water
- Gas
- Structural steel
- Other
- N/A
Supply characteristics and earthing arrangements
-
Earthing arrangements
-
Number of live conductors
-
Ze (ohms)
-
PFC
-
Nominal voltage V
-
Supply Protective Device BS(EN)
-
Supply Protective Device Type
-
Supply Protective Device rated current
-
Confirmation supply polarity
Consumer Units
-
Adequacy of working space/accessibility to consumer unit
-
Security of fixing
-
Condition of enclosure in terms of IP rating
-
Condition of enclosure in terms of fire rating
-
Condition of enclosure
-
Operation of main switch
-
Manual operation of MCBS/RCBOS/AFDDS
-
Correct identification of circuit details and protective devices
-
Presence of RCD six-monthly test notice
-
Presence of other required labelling
-
Compatibility of protective devices and other components, correct type and rating
-
Protection against mechanical damage where cables enter consumer unit
-
RCDs provided for additional protection
-
Confirmation of indication that SPD is functional.
-
Confirmation that AFDD is fitted for requited circuits
-
Confirmation that ALL conductor connections are correctly located in terminals and are tight and secure
Final Circuits
-
Identification of conductors
-
Cables correctly supported
-
Condition of insulation of live partsk
-
Non-sheathed cables protected by enclosure in conduit, ducting or trunking
-
Adequacy of cables for current-carrying capacity
-
Coordination between conductors and overload protective devices
-
Adequacy of protective devices: type and rated current for fault protection
-
Presence and adequacy of circuit protective conductors
-
Wiring system is appropriate for the type and nature of the installation and external influences
-
Provision of additional requirements for protection by RCD not exceeding 30mA
-
Provision of fire barriers and sealing arrangements
-
Termination of cables at enclosures (mechanically and electrically sound)
-
Condition of accessories
-
Suitability of accessories for external influences
Locations containing a bath or shower
-
Additional protection for all low voltage circuits by RCD not exceeding 30mA
-
Presence of supplementary bonding conductors
-
Low voltage socket outlets sited at least 2.5 m from zone 1
-
Suitability of equipment for external influences for installed location in terms of IP rating
-
Suitability of accessories and control gear for particular zone
Testing sampling
Test Results
-
Circuit description
-
Type of wiring and Reference method
-
Number of points
-
Live (mm2)
-
CPC (mm2)
-
Overcurrent protective device
-
RCD/RCBO/AFDD Type
-
RCD/RCBO/AFDD Operating current (mA)
-
RCD/RCBO/AFDD Breaking capacity (kA)
-
Main RCD details (if present)
-
Ring circuit r1 value (ohms)
-
Ring circuit rn value (ohms)
-
Ring circuit r2 value (ohms)
-
R1+R2
-
Insulation resistance test voltage V
-
Live-Live (Mohms)
-
Live-Earth (Mohms)
-
Polarity
-
Maximum measured Zs
-
RCD disconnection time (ms)
-
RCD/RCBO/AFDD test button operation
Fire Detection check
-
Fire defection Grade and Category
- D1/LD2/Enhanced
- D1/F/LD1
- D1/F/LD2
- D1/LD2
- D1/LD1
- D1/LD3
- N/A
-
Number, location, type and expiry dates of smoke detectors
-
Fire Alarm functional check
-
Smoke detectors connected to permanent supply
-
Smoke detectors/trunking fixed using screws
-
FD certificate is available and correct